DIY: Camber Kit Install

[ThaJokaa]

Tools Needed:
14mm Wrench /// Bolt Remover Thing (cant think of name)
Air Wrench

and of course the camber kit

Step One:
Remove Your Tires
Not Much to tell on How to Remove Your Tire....

Step Two:
After Tire Removal it should look like this

Get The Air Wrench with the 14mm and remove the screw/bolt whatever you call it... (the red arrow is pointing at it)
After it should look like this

then take off the other two bolts in the back and remove those so u can put on your new ones...

Step Three:
Sorry No Accurate Pics for this one Install the Camber and adjust it to how evr you want it to be from 2-5 inches

you can move the center peice to move it to the desiered lenght

after your wheels should be straight

Its not the hard to take out and install
BTW: Its My First Write Up So Im Going to update it later thanks

 

[TheRealPeterman]

Pretty straightforward install. Wondering, though...........why are u putting a camber kit on a seemingly stock suspension? what'd i miss?

 

[Kaotic_Zeus]

torque specs? isn't one hole a different shape on the camber kit than the other one?

 

[ThaJokaa]

Pretty straightforward install. Wondering, though...........why are u putting a camber kit on a seemingly stock suspension? what'd i miss?

because my wheels were right and it was eatin up my tires

torque specs? isn't one hole a different shape on the camber kit than the other one?

??? what are u talkin about??

 

[Kaotic_Zeus]

on the camber kit where it bolts to the frame, is one hole different than the other? look at the stock one closely.

 

[ThaJokaa]

on the camber kit where it bolts to the frame, is one hole different than the other? look at the stock one closely.

no the bolts are still connect and covered in some grey s**t that my guess is dirt

 

[EK|B]

Did you get an alignment?

 

[SupaSedan]

Am I looking at the stock 185 steelies or did you pop some bigger 4x100's on there?

 

[ThaJokaa]

stock

 

[greenlx777]

SPC is solid

 

[ojaii]

is that the front camber or the rear? sorry bout the noob questions

 

[ThaJokaa]

back man

 

[Raabe]

hand tools do the job just as well

 

[ThaJokaa]

hand tools do the job just as well

agreed towhook

 

[StacyBaby2o6]

cambers i ordered off of EBAY

so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!

 

[StacyBaby2o6]

cambers i ordered off of EBAY

so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!

 

[StacyBaby2o6]

cambers i ordered off of EBAY

so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!

<a href="http://s155.photobucket.com/albums/s302/KHMERL0VE2O6/?action=view&current=163403525_o.jpg" target="_blank"><img src="http://i155.photobucket.com/albums/s302/KHMERL0VE2O6/163403525_o.jpg" border="0" alt="Photobucket"></a>

 

[StacyBaby2o6]

so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!

wtf wont my pictures show up???

 

[ThaJokaa]

gotta use the

 

[StacyBaby2o6]

the picture of what i ordered off EBAY

hopefully this works...