NEW PICS TOP OF PAGE 3
just became a memeber not too long ago figured id whore out my pics
rolling shot
pic is huge put just doesn't look right down sized
http://www.we-todd-did-racing.com/wetoddimage2.wtdr/i=wMzI3ODg5NnM0MTNkZmQzMXk1NDE=.jpg
intieror shot, its about 2 years old but nothing has changed on the dash
rear suspension SRR lca, sway bar. suspension all around is KYB AGX with ground control coil overs w/ integra spring rates
http://www.we-todd-did-racing.com/wetoddimage2.wtdr/i=wMzA5ODA1NnM0MTNkZmQzMXk1NDE=.jpg
exhuast is a comptech painted cast iron, and the tip was cut off and some muffler piping was welded on
jdm 95.5-97 ITR wheel's, and hubs, 02 prelude VTEC rotors and claipers.
after i first installed it
stock 95.5-97 ITR rear brakes and wheel with power slot rotors (or something like that)
just became a memeber not too long ago figured id whore out my pics
rolling shot
pic is huge put just doesn't look right down sized
http://www.we-todd-did-racing.com/wetoddimage2.wtdr/i=wMzI3ODg5NnM0MTNkZmQzMXk1NDE=.jpg
intieror shot, its about 2 years old but nothing has changed on the dash
rear suspension SRR lca, sway bar. suspension all around is KYB AGX with ground control coil overs w/ integra spring rates
http://www.we-todd-did-racing.com/wetoddimage2.wtdr/i=wMzA5ODA1NnM0MTNkZmQzMXk1NDE=.jpg
exhuast is a comptech painted cast iron, and the tip was cut off and some muffler piping was welded on
jdm 95.5-97 ITR wheel's, and hubs, 02 prelude VTEC rotors and claipers.
after i first installed it
stock 95.5-97 ITR rear brakes and wheel with power slot rotors (or something like that)