2000 Si Em1

[aznstevo22]

I'm woundering how can I modify my car, and will get faster and fun??? But please keep NA, no turbo!!! THX~ Give me advise.

 

[aznstevo22]

any civic group meeting recently around San Francisco Bay Area??? I wanna join~

 

[DarkCreep]

Get an intake, intake manifold, headers and a decent exhaust set up and you are good for a good 15hp that you will feel.

 

[EK|B]

Get an intake, intake manifold, headers and a decent exhaust set up and you are good for a good 15hp that you will feel.

(

 

[umair]

Get an intake, intake manifold, headers and a decent exhaust set up and you are good for a good 15hp that you will feel.

you can also get cams, light weight fly wheel, clutch, a crank pulley and hondata.

 

[spoolinem1]

i have same car i have intake header exhaust test pipe throttle body intake manifold its a decent gain and it will keep you happy for awhile then youll be like me and ready to inside the motor and do cams rods and pistons but you will be happy for awhile

 

[neoc03]

A full N/A build will bump you just over the 200hp mark. That's allot of money to spend though. Boost isn't really that big of a deal once you understand it. Plus saves you a whole lot of money vs. N/A.

 

[96 DX Hatch]

You need NOS, and two of the big ones...and stevo, you'll need them by tonight.

 

[Bruckhoff_34]

You need NOS, and two of the big ones...and stevo, you'll need them by tonight.

that is a classic

 

[dank24]

build the head and slap on a stage 2 clutch with a lightweight flywheel.

 

[Black99Si]

booooooooooooooooooooooooooooooooooooooooooooooost

 

[Billy.]

if you dont like the sound of minimal gains from bolt ons your only option is boost, except of course the expensive NA high compression route. one other option what will give you some more power is to do a block swap to something larger, b18 or b20. but a block swap with bolt ons will probably cost about the same as a homebuilt turbo setup and end up making less power than boost

 

[mylovehx]

ive always wanted to do a block swap

 

[Billy.]

ive always wanted to do a block swap

i had a b20z block swap on a b16 head, all stock. it was a torqie SOB

 

[aznstevo22]

i have same car i have intake header exhaust test pipe throttle body intake manifold its a decent gain and it will keep you happy for awhile then youll be like me and ready to inside the motor and do cams rods and pistons but you will be happy for awhile

yeah, I'm thinking to mod it like what you did.

 

[DarkCreep]

you can also get cams, light weight fly wheel, clutch, a crank pulley and hondata.

Yeah, but then it gets more complicated and it increases the chances of your car being on jackstands.