just traded my wheels for a nitrous kit(wet shot) plan on doing a 75 shot on my b18b. ive already been told to get a window switch and i was just wondering what advice you guys who use nitrous would have. i need to pick up a bottle heater and a gauge as well. the only question i have is the wiring. what do i need to run wires to? its got wires for the purge as well on the other solenoids. il get some pics up later so you can see what i mean. thanks
a few questions for the nitrous guys
- Thread starter hardcore97
- Start date
well for sure get a window switch case you dnt wana shoot early and ya only really wana shoot at wot. I bought a rpm/tps activated switch for like $100 will shooot only at certain rpm when at wot. the wiring pretty simple you got your gronds for the purge and solenoid. and your powers. you will have your main power switch hooked up to your window switch which will arm your whole system but will not shoot till your window switch says too. Your window switchwill have the power and ground leads as well. Plus it will have your rpm and tps wire. The power wires from the window switch will go to your solenoids. the purge will need its own push button switch but you can hook the power lead to the main arming switch. Hopefully i made sense to you ha ha. I run a 50 shot on my si hatch. Ohh yea dont for get your fuses whichi would put after the main arming switch.
yo go to www.holley.com and go to the nitrous section and you can download the pdf instruction manual just look for the kit close to yours thats.
I wouldnt use "used" selenoids. Having a selenoid stuck open wouldnt be the best thing for your engine for obvious reasons.