Aftermarket stereo system installation

[HARMON]

ok so i"m attepmting to put a new pioneer deck in my "98 LX. problem is, the back of the stock sterio has a braket the screws to the back of it to bolt to the internals of the dash. Holding it in place. The Pioneer deck, obv. doesnt have said bracket..... How the F ck do you get the new deck to stay put in the console???

 

[DarkCreep]

Dont you have bolts on the bottom of the climate control where the 12v output is at? I believe its (4) 8mm bolts.

 

[Manderson]

ok so i"m attepmting to put a new pioneer deck in my "98 LX. problem is, the back of the stock sterio has a braket the screws to the back of it to bolt to the internals of the dash. Holding it in place. The Pioneer deck, obv. doesnt have said bracket..... How the F ck do you get the new deck to stay put in the console???

once you install the sleeve that goes around the new deck slide in the new deck and it will lock in place. I say dont worry about the back bracket.

 

[HARMON]

ok so what r u talking about installing the sleeve (yes ik WHAT the sleeve is). How do you "install" it. sry, i have ABSOLUTLY 0 knowledge about sterios ect. i could build an engine out of coconut shells and sand, but cant install a sterio lol.

 

[Manderson]

the sleeve will mount to your install kit. see if this link helps any. see page 10.
http://www.installdr.com/InstallDocs/Honda/PDF/466013.pdf

 

[Manderson]

...i could build an engine out of coconut shells and sand, but cant install a sterio lol.

yea, well i could build a stereo out of coconut shells and sand (think i might need a potato too) but i sure suck at engines...