Another question about cast iron manifold.

[Boricuanology]

Ok a friend of mines is putting a turbo kit together, and he wants to use a cast iron manifold.
Here is the list of manifolds I have found on Ebay and some sites.:
Im trying to get the one with the wastegate location right in the middle.

Have any of you guys had any experience with this manifold? p
lease help me out.

http://cgi.ebay.com/ebaymotors/Honda-Civic-B-Series-Cast-Iron-Turbo-Manifold-B16-B18_W0QQcmdZViewItemQQcategoryZ33632QQihZ019QQitemZ290259572376QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/Honda-Acura-B-Cast-Iron-Turbo-Manifold-B16-B20-GSR-LS_W0QQcmdZViewItemQQcategoryZ33632QQihZ007QQitemZ170260653979QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/HONDA-B16-18-20-CAST-IRON-TURBO-EXHAUST-MANIFOLD-NEW_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ33742QQihZ014QQitemZ330219743014QQrdZ1QQsspagenameZWD1V

http://cgi.ebay.com/ebaymotors/BLOX-RACING-TURBO-EXHAUST-MANIFOLD-HONDA-ACURA-B16-B18_W0QQcmdZViewItemQQcategoryZ33742QQihZ021QQitemZ310082447646QQrdZ1QQsspagenameZWDVW

http://spaturbousa.com/home//index.php?page=shop.product_details&flypage=shop.flypage&product_id=10&category_id=5&manufacturer_id=0&option=com_virtuemart&Itemid=60

http://spaturbousa.com/home//index.php?page=shop.product_details&flypage=shop.flypage&product_id=8&category_id=5&manufacturer_id=0&option=com_virtuemart&Itemid=60

 

[Boricuanology]

Any fitment issues with the list above?
Has anybody use the SPA manifolds? Althou a bit more expensive I like the position of the wastegate on this two since It looks like you wont need an elbow adapter?
Any info will be apreciate for any of this manifolds guys, and it will help anybody else deciding wich manifold to get since some of this manifold are new to the market.
thanks.
Please bump if you see!!

 

[Gonzo]

i am using that manifold on mine and i have an XSpower Wg. The only problem i have with that is that wg hits my hood when the engine rotates when im hittin boost. So now i have a little dent in the middle of my hood. But as far as the dump tubegoe i dont have any problems

 

[Pootie]

i have seen a few people running the BLOX manifold AKA "the one with the gate in the middle".. and they seem to hold up pretty well.. One of the kids just made 436whp with an upgraded turbo.

i'd go with that .. the SAP topmount kinda makes the turbo sit funny.. the downpipe points into the block.
They make a adapter plate to make it sit staright, but it makes the turbo sit higher and might hit the hood and affect flow.

 

[Boricuanology]

After giving it some thoughts we not gonna go top mount, so now we will like to see feedbacks on the other manifolds:

links no good homie

Sorry about that, problem fix!

http://cgi.ebay.com/ebaymotors/Honda-Civic-B-Series-Cast-Iron-Turbo-Manifold-B16-B18_W0QQcmdZViewItemQQ_trksidZp1713Q2em153Q2el1262QQcategoryZ33632QQihZ002QQitemZ120307013004QQtcZphoto

http://cgi.ebay.com/ebaymotors/Honda-Acura-B-Cast-Iron-Turbo-Manifold-B16-B20-GSR-LS_W0QQcmdZViewItemQQ_trksidZp1713Q2em153Q2el1262QQcategoryZ33632QQihZ010QQitemZ200255519964QQtcZphoto

http://cgi.ebay.com/ebaymotors/HONDA-B16-18-20-CAST-IRON-TURBO-EXHAUST-MANIFOLD-NEW_W0QQcmdZViewItemQQ_trksidZp1713Q2em153Q2el1262QQcategoryZ33742QQihZ014QQitemZ330219743014QQtcZphoto

http://cgi.ebay.com/ebaymotors/BLOX-RACING-TURBO-EXHAUST-MANIFOLD-HONDA-ACURA-B16-B18_W0QQcmdZViewItemQQcategoryZ33742QQihZ021QQitemZ310084447499QQrdZ1QQsspagenameZWDVW

http://spaturbousa.com/home//index.php?page=shop.product_details&flypage=shop.flypage&product_id=10&category_id=5&manufacturer_id=0&option=com_virtuemart&Itemid=60

[Any feebacks/imputs in any of these manifolds?