anybody used this??

[cuzzfolk99]

http://cgi.ebay.com/ebaymotors/Turbo-440cc-30PSI-CIVIC-D16Z6-ZC-Vtec-P28-Boost-Chip_W0QQcmdZViewItemQQcategoryZ33742QQihZ019QQitemZ8028133742QQrdZ1QQsspagenameZWD1V

i purchased one out of curiosity and im going to put iti in my p28 for my 00 boosted si. im planning on running 8 psi on it . But do yoou think i can run 10psi?? daily driving it on stock internals? thnaks

 

[Genuine Rolla]

10psi should be no problem from what i've heard but dont take my w0rd for it. Not sure if that chip is going to work and i've never heard of a chip that retards the timing...I thought you had to do that yourself and its not something a computer can change...

 

[ryan89crx]

i honestly wouldnt boost on some random map that you bought on the internet. who knows if you will have enough fuel? the basemaps ive made with 120% fuel were ALWAYS too lean and i had to add more fuel just to get the AFRs down to the mid 12s.

you're asking for disaster running that map on your car. its only a matter of time until it blows...

 

[cuzzfolk99]

what is a good A/F mixture on a boosted stock car?? I have a wideband and ill install it when i put the chip in to see what things are looking like

 

[ryan89crx]

what is a good A/F mixture on a boosted stock car?? I have a wideband and ill install it when i put the chip in to see what things are looking like

for the first couple psi i like 12.5, then id say over 3-4psi i richen it up to 12, then as i get higher(7-8+) i usually end up around 11.8 or so.

 

[Steven.]

ebay chips are junk.