Can someone with an EM1 do me a favor please?

[Evan.]

I need some pictures of OEM brackets / locations. If you have a crazy tucked modified bay this isn't going to work.

Here's the three locations I need a picture of please, a zoomed out picture (but close enough so I can see where things go):

1) The OEM clutch line @ the front transmission hanger bracket. (top of transmission, can't miss it)

2) The distributor wire harness (behind the distributor down to wear it hooks into the main wire harness)

3) The evap purge hose. This goes from the center of the intake manifold to the evap purge canister on the firewall. I need a picture of the routing of the entire line, please.

If you need me to clarify more that's no problem. The more pictures of each the better. Remember, I need OEM brackets / routing so no aftermarket / re-routed please. And it needs to be an EM1, no ITR's or first gen B16 etc.

I can even paypal you a couple bucks (like $10) for your trouble.

Thank you!

 

[sohclubkid]

un-tucking? lol
bump for sk8

 

[Evan.]

I don't think un-tucking is a word. LOL.

But anyhow, yes. And all of the OEM brackets I've ordered don't work with my setup haha. So I need to figure out what's up.

 

[pmac193]

My 97 del sol has a factory B16A2 would that work? lol

 

[Evan.]

I think so. Try it for me, please.

 

[civicfan111]

Why would yu change it back? Are yu done with ur car?

 

[Evan.]

No, I'm not done with the car. In my honest opinion, tucks suck. At least for a daily driven, california registered car.

EDIT: Actually they all are stupid in my opinion. It makes everything harder and no one ever sees it driving past you.

 

[civicfan111]

Ah, makes sense.. I have an ex I'm not tucking it just wouldn't even make sense my bay has like 3 fuse boxes under the hood lol

 

[projektej8]

evan, why not use ISIS or parts diagrams?

 

[pmac193]

When I get home from work today I'll snap some pics

 

[Evan.]

evan, why not use ISIS or parts diagrams?

I have, they don't illustrate how they go well enough. For instance, I have the OE clutch line, but if I try to install the OE trans bracket / hanger the clutch line gets in the way?

When I get home from work today I'll snap some pics

Thank you sir!

 

[Dale_K]

I don't know if these will help or not.

 

[pmac193]

 

[Evan.]

thank you VERY VERY much!

 

[NOFX]

And a generic overhead shot I had saved. Other ones had intakes.

 

[Evan.]

thank you amy!

pmac, can you do me one last favor? I need a picture of the engine wire harness like all around the starter area. It might be a bit hard to get at without removing the top half airbox, so like I said I can paypal you for your trouble.

 

[pmac193]

Sure, I'll try to get to it after work today.

 

[pmac193]

Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us