cheap turbo kit

nurevEKcivic00

New Member
Registered VIP
5+ Year Member
i need an idea for a cheap yet good quality turbo kit for a d16y7, if anybodys got any good sites with very cheap prices post. while im at it ill ask while im here, would it hurt to buy a y8 turbo kit or a6/zc kit but use it on my y7 motor? i know it would if u went with a b series kit cus of the powwer difference but let me know. alos if anyone knows of a complete engine internal rebuild kit for a turbo y7 engine let me know cus i cant find em, ill ask again, would it hurt to use the y8 internal kit on a y7. i think i would but let me know again, any help would be greatly appreciated
 

King Bob

The life'o Riley
Registered VIP
5+ Year Member
10+ Year Member
homemadeturbo.com
 


all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
nurevEKcivic00 said:
i need an idea for a cheap yet good quality turbo kit for a d16y7, if anybodys got any good sites with very cheap prices post. while im at it ill ask while im here, would it hurt to buy a y8 turbo kit or a6/zc kit but use it on my y7 motor? i know it would if u went with a b series kit cus of the powwer difference but let me know. alos if anyone knows of a complete engine internal rebuild kit for a turbo y7 engine let me know cus i cant find em, ill ask again, would it hurt to use the y8 internal kit on a y7. i think i would but let me know again, any help would be greatly appreciated
i saw your post on my for sale thread... like i said in there, depending on how my money situation goes for the next week or two, i will let you know if im selling my kit. But yeah, basically a d-series kit will fit any d-series. The only think that will be different would be the intercooler piping (different for each generation) and fuel management (set specific to your car). But the manifold, turbo, and downpipe would be just fine for your y7. Intercoolers are pretty much universal. In terms of cheapness, you will never be happy with the answer. Odds are, if you are looking for a new kit, and its cheap, it will suck. Piece together s**t from other people like i did. Or buy a used complete kit.
 


Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
greddy kits are pretty cheap, good quality tho

ssautochrome.com
 

all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
depends what you call cheap green... a complete greddy kit i have never seen for less then 1200 bucks. Maybe it was 1299
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
thats not bad for a full kit with engine managment. comes with EVERY nut bolt needed.
 

all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
Green 91 said:
thats not bad for a full kit with engine managment. comes with EVERY nut bolt needed.
not an intercooler!! And e-manage is s**t from the factory and i dont trust it! :???:
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
when i buy a greddy kit im selling the emanage, and not running a intercooler, low psi intercoolers are kinda useless, but thats my opinion.
 

all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
ya think so?? Whys that... still takes a good bit of temp off of that intake charge.
 

all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
Green 91 said:
when i buy a greddy kit im selling the emanage, and not running a intercooler, low psi intercoolers are kinda useless, but thats my opinion.
so if you sell the emanage, and done use an intercooler, you are basically paying 1200-1500 bucks for a dinky turbo and some blue couplers..
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
im goign to run turboedit, ill add a intercooler later(small one at that).

most people put big FMICs on, got to relize it takes tiem to fill that space, large intercooler= lag.
 

all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
so then why the f**k wouldnt you just do a hf type manifold, get a better turbo.. you already had a kit pieced together i thought?
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
HAD, i can get teh greddy cast manifold, use the turbo and make atleast 160whp with 7psi, tom did why cant it?
 

all go no show

Half Retarded
Registered VIP
5+ Year Member
10+ Year Member
Green 91 said:
HAD, i can get teh greddy cast manifold, use the turbo and make atleast 160whp with 7psi, tom did why cant it?
how about this. I HAVE the greddy cast manifold and turbo. Buy my setup. I know you want to.
 

Shiznit

Stickin it to the Man
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
lets stick to the topic guys, take it to pm
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Shiznit said:
lets stick to the topic guys, take it to pm
:werd:

cheap kits, you need to name a price range, ebay has cheap kits, but remebr you get what you pay for
 

nurevEKcivic00

New Member
Registered VIP
5+ Year Member
well thanx guys for the posts they are turning out prety damn good, um as for a price range 0-2000 would be cheap for me, becuase i have to buy all the internals yet. and dude (all go no show ) let me knwo about that kit cus im def interested, that price sounds awesom. when i buy a kit i want everything to come with it basicly cause im being a lazy ass i guess but it makes things that much easier=) thanx guys again its been a help keep e coming,
o and ps i dont know if i trust ebay kits, that is the turbo and intercooler that come with them
 

nurevEKcivic00

New Member
Registered VIP
5+ Year Member
o and i was hoping to run a t3/t4 turbo if that helps but any sugjestions would be appreciated (in the power part) cus i try my best to find out as much as i can befor purchasing,
 


Top