hey guys there is finally a turbo kit out for our cars that doesnt suck. its the SF kit. this kit rocks!! it comes with everything u need except for gauges. the price is 3100, which isnt bad considering some guy ran mid 13s w/ stock internals. the kit is awesome u will be glad u bought it. im me on aim at KR4ZY K1D for more info.
D17 turbo kit
- Thread starter import2nr
- Start date
yup i have the kit.. it runs low 13's with 9psi
yep my friend has that kit man it rocks, post some pics of it under members rides man.
new to the site and just purchased an 01 civic ex ....lookin for more info on this turbo kit....where i can get specs and max boost and possible hp and tq gains so anything would be cool
thanks jay
thanks jay
the kit consist of
t-3 turbo
custom tubular manifold
intercooler (19x9x2 3/4)
intercooler piping 2 1/4"(powerd coated)
couplers&clamps
turbo xs bov
oil lines
air intake
APC high flow filter
down pipe 2 1/2"
fuel system -proven passed 10psi(not recomended)
map sensor isolation valve
t-3 turbo
custom tubular manifold
intercooler (19x9x2 3/4)
intercooler piping 2 1/4"(powerd coated)
couplers&clamps
turbo xs bov
oil lines
air intake
APC high flow filter
down pipe 2 1/2"
fuel system -proven passed 10psi(not recomended)
map sensor isolation valve
can anybody tell me what brand of turbo kit that fits to my LX couple?
Where is that kit at? I found a kit on Maxrev for the D17..Garrett T03/T04 Turbo..
Is there a site for this kit?
My friend ran 13.6 at 9psi.
19" wheel on the rear lol.
19" wheel on the rear lol.
i have the sf kit also, im doing 10lbs of boost daily LoL, i beat you out by 1lb osoboosted!
The SF kit utilizes custom blends of garrett turbos. We have our own combinations made to give everyone what they want. We have everything from a basic .42 int garrett, to a T3 with a 56mm intake wheel fit into a .60 housing.
The turbo that i am personally using, is what we call the "motor breaker". It is a turbo that you do not put on a stock motor. It is a .48 exhaust with a standard wheel clipped, then a 56mm intake wheel in a custom .60 housing. The thing spools before 3000 rpm, and i have a full 10 psi of boost before 3600.
The turbo that i am personally using, is what we call the "motor breaker". It is a turbo that you do not put on a stock motor. It is a .48 exhaust with a standard wheel clipped, then a 56mm intake wheel in a custom .60 housing. The thing spools before 3000 rpm, and i have a full 10 psi of boost before 3600.
So where can I find this kit??? What is "SF"? Never heard of this Company.
You can email me about the kit. I can send you pictures and specs. Our website is still not up, i have been trying to get our guy to fix that. But when it will be up, you can get to it via www.staffordfabrication.com, www.turboman.net, or www.turboman.org