dyno results

[rafa_si]

Hi im new here i just want to share my results with you

all the tunning was made on a dynojet i drive a 94 civic coupe and some of my mods are :
skumk2 intake manifold
profesional t/b 68mm
skunk2 camgears and tuner cams stage 2
port and polish
s/s valves springs and retainers
b20 standard bore
11.6.1 pistons oem rods
ecu p28 chrome
header tri-y
2.5 exaust
tranny 4.40 obx lsd

207 whp 146 tq on pump gas

considering the weight and whp et's any guess????

 

[Failsafe88]

15's ??????

 

[rafa_si]

15's jajajajajajajaja would be nice ....

 

[95coupeWI]

What motor do you even have? lol..

 

[Failsafe88]

What motor do you even have? lol..

Says b20 in his deal.

 

[xxBLOOD88SHOTxx]

crvtec, you might cut 13s with good tires

 

[rafa_si]

22x8 slick tires we are going to use

 

[AlaskaB16]

22x8? Maybe i'm misunderstanding or maybe that's how slicks are measured but I read that as 22" x 8"... Is that correct?

 

[rafa_si]

22x8? Maybe i'm misunderstanding or maybe that's how slicks are measured but I read that as 22" x 8"... Is that correct?

you are right

 

[AlaskaB16]

Twenty two's huh? Wow... Guess I know ZERO about slicks and wheel sizes for drag racing Honda's. That's a big freakn' wheel!

 

[rafa_si]

you think ???
a good friend of mine ran 13.6 1.6 sohc non vtec with those tires way more less tq let's see how my engine behave

 

[stcopley]

The tire is 22" usually on a 15 or a 16 inch rim for hondas. 8 inches wide. It is lower psi for traction purposes which allows the 22" tire to fit in the wheel well.

 

[Failsafe88]

you think ???
a good friend of mine ran 13.6 1.6 sohc non vtec with those tires way more less tq let's see how my engine behave

And what is done to that motor