ECU easy question, ( i hope )

seaton05261979

New Member
5+ Year Member
I have a DX wiring harness in my 93 civic and im done with my d16z6 swap. I went to hook up my ecu wires and I thought I was going to be just tapping into wires already there, but to my dismay I have to put new pins in as well. Here's the question,...Can anyone give me an idea as to how I can get ahold of some pins to put in the plugs?
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
junkyards
 


seaton05261979

New Member
5+ Year Member
The one I went to won't seperate peices of an ecu wire harness. I would have to spend 150 for the whole thing. Any other ideas.
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
ebay some times has them.

i have a ecu harnnes, i was goign to make a OBD0-OBD1 jumper but never did
 


cheezeonmakneez

love unicorns
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
I'm not sure which pins you need but I have an obd1 z6 harness and a mpfi obd0 harness. I'll hook u up. Just let me know which pins and pm me an address and I'll send them your way.
 

cheezeonmakneez

love unicorns
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
I'm not sure which pins you need but I have an obd1 z6 harness and a mpfi obd0 harness. I'll hook u up. Just let me know which pins and pm me an address and I'll send them your way.
How about you tell me which plug's you need and I'll do it that way.
 


Top