Ecu suggestions?

CSB

New Member
Registered VIP
5+ Year Member
10+ Year Member
Please i really need advice on these:
Should i go with a new ecu? (which)
should I get mine chipped?
vafc???

Please help!!!! dont know what direction to go............I want to get the best of my new setup.

New setup on my EK4::
Buddy Club spec III+ camshafts
buddy club cam gears
supertech dual springs + retainers

and (what i had before)
P&P head
b&M FPR
AEM trupulley kit
DC 4-2-1 header

My car is a b16a
(1998 civic vti - EK4)

Thanks in advance for the help
 

93turbo16

New Member
Registered VIP
5+ Year Member
10+ Year Member
You are from out of the country correct? If so I still think the best bet is a chipped OBD1 ecu. And learn to tune it or get a vafc and clean it up yourself if no one is capable of doing it with or for you.
 


CSB

New Member
Registered VIP
5+ Year Member
10+ Year Member
93turbo16 said:
You are from out of the country correct? If so I still think the best bet is a chipped OBD1 ecu. And learn to tune it or get a vafc and clean it up yourself if no one is capable of doing it with or for you.
WHATS A GOOD CHOICE FOR A CHIPPED ECU?
i HAVE BEEN OFERED this:
ECU Integra TypeR JDM
37820-P73-003

Will it be a good choice for my current setup?
or stil a chipped ecu would be better?
 

93turbo16

New Member
Registered VIP
5+ Year Member
10+ Year Member
CSB said:
WHATS A GOOD CHOICE FOR A CHIPPED ECU?
i HAVE BEEN OFERED this:
ECU Integra TypeR JDM
37820-P73-003

Will it be a good choice for my current setup?
or stil a chipped ecu would be better?

I believe that ecu is an OBD2 ecu, I would rather see you go with a chipped P28 and a conversion harness.
 


CSB

New Member
Registered VIP
5+ Year Member
10+ Year Member
93turbo16 said:
I believe that ecu is an OBD2 ecu, I would rather see you go with a chipped P28 and a conversion harness.
This should be chipped to some special parameters for my setup or there is a generic type of chip for the OBD 1?
What do you recomend? where to buy from, aprox. price?

Thanks
 


Top