Electrical gurus...

[Evan.]

So I bolted on the ctr mirror today, but they don't fold in or out. I can hear the relay clicking, but the mirrors don't do anything.

I think I have the ground / power mixed up on the mirror motor (if that's possible?). I mean, if you look at the wiring diagrams above, notice how on the bottom diagram, from relay slot #5 it connects to both "A" and "B", similar for the #1 slot.

However, on the first diagram, relay slot #5 connects to "A" and "A" on each mirror.

So, which is the correct way?

I'm good at electronics, but I have a feeling that Japanese Honda is a tid bit better than me

 

[Genuine Rolla]

I think you might have the power and ground wires mixed up that go to the mirror itself..but not the relay.

 

[Evan.]

that's what I was thinking.

Because I grabbed a multimeter and I get resistance from the mirrors AND the wires, however when I turn it to volts, it goes against the terminals in which my wires are placed.

Hopefully I'll be able to try the change up here at work tonight and get it working.

 

[wfw12]

i think i wired mine "A" and "B" together instead of "A" and "A"
i had them working for about 2 weeks but now they dont, im not sure what it is other than needing a new relay.
i can check my wiring tommorow if you dont figure it out by then

 

[Evan.]

Yeah, if you could do that, it'd be amazing