exospeed head

[turbowhat_n_dat]

Has anyone used the Exospeed head yet? Looking to pick one up at there special price.

port/polish
3 angle valve job
new valve seals
resurface head
regrind cam

$950.00

Let me know if anyone has tried this other than the owner of exo.

thanx in advance.

G FLICK

 

[VTEC2nr]

What head does this buy you?

 

[turbowhat_n_dat]

The head that happens to be produced by one of the sponsors of this forum.

http://www.clubcivic.com/board/showthread.php?s=&threadid=10724

 

[VTEC2nr]

You realize you have to send them your head to have the work done...right?

 

[iamgod]

Originally posted by VTEC2nr
You realize you have to send them your head to have the work done...right?

what the f**k is your point?


to the original poster

do you plan on using this head for a FI motor or an NA motor?

 

[SeanMc300]

i think his point is that its not like he is getting a replacment head...he will have to take his head off his car so he cant drive it for a while.

 

[VTEC2nr]

Originally posted by iamgod
what the f**k is your point?


to the original poster

do you plan on using this head for a FI motor or an NA motor?

Whoa, that was unnecessary.
I was just making sure that turbowhat_n_dat knew that he wasn't getting a head and all that work done for that price. It sounded like that's what he thought.

 

[turbowhat_n_dat]

yeah, I knew that, I have been researching this head for a while and am trying to get other news from anyone who has used it. I realize that the guy who does the job on this head set a record for fastest D or some s**t also.

Using it for Forced Induction, fully built motor, just need a head and this one looks good and for a good price, with a reground cam-about $900.00

 

[iamgod]

Originally posted by turbowhat_n_dat
yeah, I knew that, I have been researching this head for a while and am trying to get other news from anyone who has used it. I realize that the guy who does the job on this head set a record for fastest D or some s**t also.

Using it for Forced Induction, fully built motor, just need a head and this one looks good and for a good price, with a reground cam-about $900.00

if i were you i would not get the head until you had the turbo and had the specs for the cam, if you dont have the turbo and you run a turbo grind cam on a non turbo motor your car will not run good at all

 

[turbowhat_n_dat]

I already am turbo'd.

F-Max kit, 12psi, 197whp.

T3/T4

Good thinking though............

 

[iamgod]

Originally posted by turbowhat_n_dat
I already am turbo'd.

F-Max kit, 12psi, 197whp.

T3/T4

Good thinking though............

make sure they know that

 

[Exospeed*com]

input on turbo cams. no need to upgrade cam when going turbo. it can help a bit, but not highly necesarry. we can make over 400hp on stock cams on d16s and 700hp on b-series on stock cams.