garrett 60-1 t3

[Acrite3404]

im looking to get a garrett 60-1 t3 and i was wondering what the lag would be like. and what kinda power should i see around 17lbs
built ls
9:1 pistons
eagle rods
built crower head
with the ls turbo cams
with a ls tranny

 

[TiiM iiS l3eAsT]

my guess would be around 310-330whp

 

[Acrite3404]

is this a small turbo cause the ar on the compressor is .60 and i made 350 with a ebay turbo on 17 so i was hoping that this woudl make more power

 

[romanianfury]

here are the full specs on the garrett 60-1 t3...Product Description
COMPRESSOR SPECS:T04S

flow: 61 lbs/min 781cfm

.70 A/R housing

60-1 TRIM wheel

TURBINE SPECS:T3

.48 A/R housing

HIGH FLOW 76 TRIM stg 3 wheel

oil lubricated centersection.

COMES STANDARD WITH 360 DEGREE THRUST BEARING!!

supportable of 525whp

i forget what the rule of thumb was but i think for every psi you get 6-10whp someone correct me if im wrong. so a stock ls puts out around 120whp and at 17psi with the right fuel mods and a good tune you would have around 290-350 whp....but remember that its capable of 525whp. hope this answers you question