greddy emanage

[justinfetterly]

okay so i have my kit completely installed on my 2000 civic ex but i need help wiring the emanage the instructions that came with the kit suck ass and i dont think they are for my car so i wondered if anubody had any pics of the ecu pin outs or can tell me how to wire the emanage up it would be greatly appreciated

 

[civicsi94]

well i hear in the instructions there are two section in the ecu wiring. one is for the 96-98 and the other is for the 99-00. i dont know personally but i know a couple of ppl on turbod16.com know how to.

 

[haphazard]

well i hear in the instructions there are two section in the ecu wiring. one is for the 96-98 and the other is for the 99-00. i dont know personally but i know a couple of ppl on turbod16.com know how to.

like he said, go look at turbod16.com, they can help you out.

 

[iamcivic]

I had the VERY same problem..it took me forever to find out there are 2 different OBD2 ecus..The one greddy sends is for OBD2A which is for 96-98 and you need OBD2B which is 99-00. I didnt have the exact directions I had to get a OBD2B ecu pin out sheet and went by the colors on the OBD2A diargam to wire to my ecu. Took me about a week to get it done, but it worked the first time.

Very complicated, Greddy needs to tighten up on their directions. Turbod16 has the OBD2A instructions and OBD2B pin out in their FAQ section.
GOOD LUCK, youll need it