greddy type s mod

[TiiM iiS l3eAsT]

well i was reading this and am thinking about doing it......so all i take out is the little spring right? and then line up one of the 4 holes with the bottom port....

http://www.evomoto.com/tech_info.php?tPath=1&tech_id=7

 

[Steven.]

i think thats for the recurculationg ones, like on stock turboed cars. yo uwotn have to worry about stalling issues

 

[TiiM iiS l3eAsT]

hmm...so should i move all the stuff back to the way it was?

 

[Steven.]

i woudl just leave it liek it came.

most aftermarket BOVs on stock turboed cars, have stalling issues, becouse they usually dont hook it up to recuculate.

 

[TiiM iiS l3eAsT]

well i put the other spring back in....but i left the port as is....that way for the sound lol....also so i dont have to work it up it looks like......yet i see alot of ppl never running the bottom port anyways....?

im going to leave the hole facing the lower port to make it louder...will it still make it louder now that the other spring is back in?

 

[SiRcivic27]

I read it hoping that it would work on my car because I have stalling issues at low RPM when the car is cold, but yeah its only for recirculating systems. I just need to get my car to my tuner someone, I have a starting issue also that we're trying to fix.

 

[TiiM iiS l3eAsT]

what about the lower port thing....is that only for recirculating as well?

 

[Steven.]

didt we talk about that before lol?

edit
http://www.clubcivic.com/board/showthread.php?t=104333

 

[TiiM iiS l3eAsT]

no im talking about lining up 1 of the 4 holes with the bottom port.....i know to leave it open

 

[Steven.]

coudlent tell ya, im only going to run "pull-type" diverter valves