Ground question 6th gen.

[josh2k4]

I have my power wire running from the battery thorugh the firewall to my trunk, with a new in-line fuse behind the firewall. I have the rca's and remote wire running from my cd to the trunk on the opposite side of the car. I have my ground wire running from the back seat bracket that holds the back seat to the side of the frame. But, no power to the amp!

I am thinking its a bad ground, I looked around on the forum and people did suggest mounting to the seat bracket. But, does anyone have any other ground suggestions for a 6th gen.

I had a 5th gen previously and I just drilled on the left side of the trunk, but on my 6th gen the sides are coated in fiberglass

All suggestions welcome,

 

[DZNUTTS]

I used the part in the trunk where the trunk latch locks onto.........I used that same bolt on the seat and it don't work.... You can see the connection BUT it works....

 

[josh2k4]

I used the part in the trunk where the trunk latch locks onto.........I used that same bolt on the seat and it don't work.... You can see the connection BUT it works....

I actually thought about that, its covered in black paint,

I will deffinetly scrape and try that.

 

[josh2k4]

works great now, thanks.

 

[DZNUTTS]

No problem....

 

[PAguy]

durrrrrrrrrrrrrrrrrrrrrrrrr

 

[civicjuana]

i ground mine to my left tail light..but that s**t keeps falling off so i need to find a diff place too

 

[Trey99EK]

^^ Just make a small hole with a self tapping screw.

 

[TorGa3iGhT]

ground it to any screw or bolt that u see that touches the frame of the car. (ie. the screw holding hte rear strut in the trunk, etc).