head unit block off plate

[ryanM]

as some of you may know im relocating my head unit to down by the cupholder. but im trying to figure out my options for filling in the spot where the head unit was, so im looking for a block off plate that i believe is 1.25 din? correct me if i'm wrong please. but i think i am keeping the oem slave pocket there and i need something to fill the space above, at first i was thinking to cut a piece of cf to fit the hole and thats still my main solution at the moment, but does anyone actually make a block off plate to go there? maybe oem honda? just wondering. thanks

 

[Jezek]

this piece?:

 

[ryanM]

this piece?:

will it fit if i have the accessory slave pocket in there? if so then yes, i have a 99 so my climate control is different than yours.

 

[ryanM]

that is what i have and i need a block off plate where the head unit is, but i want to keep the pocket that is under it.

 

[Jezek]

hmm...I dont know if the 96-98 piece would fit there....but you DEF. want to keep the pocket? Cause if not you could get the full piece from Honda

 

[Trey99EK]

You could get the OEM plate for it.

 

[sidewayzinCA]

i dk if there is a plate but to eliminate further confussion it is a double din plate not 1.25 din

 

[ryanM]

i dk if there is a plate but to eliminate further confussion it is a double din plate not 1.25 din

umm i dont think so, that whole opening is a double din opening. the pocket is .75 din in size. so that makes the head unit a 1.25 din opening...

 

[ryanM]

hmm...I dont know if the 96-98 piece would fit there....but you DEF. want to keep the pocket? Cause if not you could get the full piece from Honda

im still thinking about weather to keep the pocket or not, i dont think it would look good with just a big flat piece of plastic there, i dont know tho. suggestions are welcome too.

still dont know if i want the pocket or not, but if not i was thinking about this LINK its 45 bux on jdmland.com OEM honda faux carbon fiber dual din cover.

 

[HcOiNvDiAc]

where did you get yours jezek?

 

[ryanM]

ok, so now im REALLY considering just going with the double din CF oem block off plate, do you guys think this will look ok?

 

[Eran]

there's a plate for integras and 99-00 civics.

http://www.passwordjdm.com/product.asp?numRecordPosition=16&P_ID=287&strPageHistory=&strKeywords=&SearchFor=&PT_ID=212

 

[ryanM]

there's a plate for integras and 99-00 civics.

http://www.passwordjdm.com/product.asp?numRecordPosition=16&P_ID=287&strPageHistory=&strKeywords=&SearchFor=&PT_ID=212

yea, i know about that. i was just wondering if there is one made so you can keep the pocket in there.

and what do you think about that, do you think it will look good with just that in there?

 

[Eran]

yea, i know about that. i was just wondering if there is one made so you can keep the pocket in there.

and what do you think about that, do you think it will look good with just that in there?

if you don't like the cf, you can always just go pick up some duplicolor trim paint. I think It'd look good completely blocked.

 

[Jezek]

I think It'd look good completely blocked.

agreed.