Headlight Adjustment

sccardslax05

vida guerra lookin fine!!
Registered VIP
5+ Year Member
10+ Year Member
anybody know how to adjust the angle and direction of the headlights? ive been driving around with my passenger side headlight aiming to the left and high and dont know how to adjust it. any help would be great.
 

GOOSE

JDM yo!
Registered VIP
5+ Year Member
10+ Year Member
well its pretty easy... kinda do it when its getting dark and put ur car like front facing the wall.. u will need to take ur front bumper off and the headlight off also.. u will need a + screw driver . Look behind the headlight and ull see where u can use the screw driver.. I think the top agustment thing is for up and down and the bottom one is for left and right once u move it enough and u think u got it right, put the light back on with ONLY the top screws of the light and turn ur headlights on and check ur progress ... and keep moving them till u get it like the other headlight.. i hope this make some sense..
 


sccardslax05

vida guerra lookin fine!!
Registered VIP
5+ Year Member
10+ Year Member
thanks ill do it when its gets warm out again cuz right now its too cold to mess with at night
 

RainyDaze

New Member
Registered VIP
5+ Year Member
10+ Year Member
I suggest that you have the car about 10 or more feet away from the wall though to get a better idea of its direction. If you have the car too close it might be a bit hard to judge it properly.
 


ferio-moreno

PS Veteran
Registered VIP
5+ Year Member
10+ Year Member
i'm having the same problem with my tyc projectors, don't have a clue how to adjust them....
 

GOOSE

JDM yo!
Registered VIP
5+ Year Member
10+ Year Member
ferio-moreno said:
i'm having the same problem with my tyc projectors, don't have a clue how to adjust them....
same thing i told the other dude... but dont turn to much cause u'll pop the screw that turn right out of its socket and u will have to open the headlight to fix it..
 

RainyDaze

New Member
Registered VIP
5+ Year Member
10+ Year Member
On my projectors there were a couple of screws that had to be adjusted, I messed with them for almost an hour until I got them where I wanted them. Unfortuanetly I think the drivers side one is aimed a bit too high, but oh well I don't care right now. Like Goose said though, you want to be careful because you can break them if you get to carried away.
 


Top