Headunit Wire's Cut

[95Civic Dx]

I have a 95 honda civic dx the pervious owner cut some of the wires on the factory head unit harness instead of spending $10 and buying one and just pluging the cd player in. so what i need to do is put the wires in the proper pins can someone help me out on a diagram for this. Searched here and couldnt find one.

Here is what i could find but not on 12volts site off of a diff form.

Heres the info from www.the12volt.com
1992 Honda Civic Stereo Information
Constant 12V+ Blue/White
Switched 12V+ Yellow/Red
Ground Black
Illumination Red/Black
Dimmer n/a
Antenna Driver's Pillar
Front Speakers 5 1/4" Doors
Left Front (+) Blue/Green
Left Front (-) Gray/Black
Right Front (+) Red/Green
Right Front (-) Brown/Black
Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Blue/Yellow
Left Rear (-) Gray/White
Right Rear (+) Red/Yellow
Right Rear (-) Brown/White

 

[Gunner]

page 6 has what you need


http://search.yahoo.com/r/_ylt=A0oG7k7mAMJNBX0A3ORXNyoA;_ylu=X3oDMTE1MWE1OGNoBHNlYwNzcgRwb3MDNARjb2xvA2FjMgR2dGlkA01TWTAwMV8xNjc-/SIG=12d2okodv/EXP=1304581446/**http://www.installdr.com/InstallDocs/Honda/PDF/466017.pdf

 

[red viper]

this happened to me before i didnt buy any parts.. get a test light find your hot wire...then find your memory( the one that turns off when the is off ) then open each speaker grill look at the two wires connected to the speaker.. the color in speaker grille indicate what side speaker it is in the radio dash hope you understand my chicken scratch