How do I keep the casing around my stereo from sliding out?

[yomuppet]

2000 Civic. Ever since I bought the car, the casing around the stereo (the part including the cubby under the stereo) has been attached completely at the top, but not attached completely at the bottom. So the bottom keeps sliding out, and I have to push it back in. I've tried to push it in as hard as I felt I should have to if it were going to "snap" into place, but it didn't. Anyone know how this is supposed to be anchored? Pictures attached. Thanks in advance

 

[skribs89si]

um...duckt tape?

 

[kellog]

my friend had the same problem in his truck, its the casing its self their should be a clip to keep it in their and level, i could of came loose or broke off.

 

[anekin007]

i had that same stereo kit thing, i hated that one. it kept poping out, so i just switch to a different one.

 

[2kstreetcivic]

I would go buy another stereo install kit....It sounds and looks like you dont have the clips to hold it in place...good luck

 

[destro7]

you dont have the stock one in there??? put the stock back in and screw it to the aftermarket stereo and it will hold fine!!

 

[yomuppet]

Originally posted by destro7
you dont have the stock one in there??? put the stock back in and screw it to the aftermarket stereo and it will hold fine!!

This is the one that was in the car when I bought it from the previous owner. If there is another one I need to get, does anyone know where I can get it, what the part number is, or have a link of some sort I can order from? Thanks

 

[rencruzz]

try the dealership they can order a stock on for ya.

 

[boostedbar]

get a kit from scohche, prolly the best kits out there.