im back!!

[matt9112]

most of you probably don't know me or remember me and i can more than likely say that same to you =/ sorry lol but im back and glad to be back and hope to learn and educate once again FTW!!

and if anybody cares i will update on my own car/s yes plural now

well i have added full koni yellows with custom shock rates all around and front tophats... finally got some new dang tires =P

i have also started a mild autocross experience as i did 8 out of about 13 events this year and traveled to south Carolina for the black lake shootout at the michilain proving grounds. sorry if i butchered the name haha
^^^lot of fun! two days of pure awesomeness

i have also picked up an ITR swaybar and blox racing end links FTW! yet to go on the car...

also if anybody cares i still hate my rims and want them gone 400-500ish R17"/45/8" with a universal lug pattern. <<<new new tires bf good wrench sports.

and in outher news I have acquired a 95 civic dx with ac,heat and power steering....its like a beamer for me haha. <engine is under repair as we speak if you didn't see my other post ok everyone close your eyes....its a four door automatic...but hey it was cheap and the gf needs something more subtle to drive.

i RLY hope this gets some awesome feedback as i laughed writing it
yours truly matt


NOW SOHC FTW!!!

 

[s_crowley 17]

pics?

 

[matt9112]

sure will do

 

[matt9112]

i do have more but yeah ask

oh and the future powerplant or atleast a hint...

outher mods include a axel back exuast the clutchmasters FX-100 a short throw shifter with all new bushings upper and lower rear tie bars the jdm fogs..not even wired yet haha a 7.5 pound flywheel 205 tires all around...jdm shift boot lol the z6 valve cover and chrome cap brembo blank rotors up front with hawk hps pads...DOT-4 fluid in whole system...in case i track it....<with flush too. i hope you all respect the fact that is about 3 diff colors right now and i dont give a rats **s lol

 

[musezik]

nice.

 

[matt9112]

not as nice as that ramhorn you got hiding in there =P however i do take pride in knowing im building my car with a purpose...i mean for alot of ppl they like to dress it up and do this and that but meh....just kick there ass at the red light dont need mugen,vtec or spoon written all over the car...not saying that stuff isnt cool cause i deff give props if you can afford it ya know?



btw musezik i have a custom intercooler for our cars that lets you run fogs and the piping in case you wanted to know i wont be using it forever though. lol hit a place in life where i cant dump anything i want in the car...im 20 and bust azz and im about to have enough for a down on a home but yeah the engine i got sitting there is just an LS but i plan on a hybrid 200whp N/A track car.

 

[toneekay]

You seem like an alright guy, a real down to earth, & honest individual. Seems like you have quite a project underway, must feel like gold when you walk in that garage huh? Haha!

SOHCFTW!

Oh and yea, WELCOME BACK!

 

[Aaron.]

looks like you got some good stuff in store for our viewing, gl with the car man, i like the diff colors

 

[s_crowley 17]

smaller wheels !

 

[Billy.]

HOLY BODY ROLL BATMAN

moving this to 6th gen members rides

 

[matt9112]

thanks didnt know exactly were to throw it haha and LOL at batman...yeah see the front drivers wheel? and its not done in the picture but the rear fenders are now rolled they would rub under high rear end load around turns aka hard 180s on course. but the fronts ehh but i have since tightened all four corners slightly..

and you think i have bodyroll? show up to an autocross lol im more on the rigid side from what i see....ever seen a honda fit go one wheeling and making everyone go oh s**t? and get VERY lucky lol but yeah front is set up LOOSE so that with little steering input the rear end rolls right around turns. =less loss of rpms.

and yes enkili RPF1s? i think they are sorry if i got it wrong buddy has a set but i cant afford them without dipping into my bank without selling those clunkers...


UPDATE: Z6 MANI with a LS b series TB slaped on it is at the shop getting machined ported to match the new larger throttle body. w00t w00t

 

[Szady]

DIdnt know you left? Then again...Im not around much either. Either way, welcome back.

 

[Tam4511]

nice car and welcome back

 

[matt9112]

love the support guys! its nothing special really lol if anything it deserves the raw title.

now if i do say so myself who's in the mood for some picture PWNage?

the engine shot is not the y7 in the 96 it is the D15 in the outher civic =P

 

[EK|B]

I didn't read anything: plans for it?

 

[somejaykid]

looks good

 

[matt9112]

plans? well read it first but the plans are to do a N/A B series track car taking into account the little things most builds overlook...the goal is a 200whp N.A 1.9 liter using the LS bottom and more than likely a b16 head as i have a few options for one...three offers exactly. but i don't know yet. and more than likely i will do crower full valve train and stage 2 cams and shot pinned rods with arp bearings and so aries pistons = MMM more than likely it will be a multi stage deal. as in il probably do a CTR 1.8 basically to start with bolt ons and a tune than get the other block i have to get ready ect... the blue 95 is just going to be a stocker DD picked it up for a steal.

turbo sohc is also an idea thats been plotted aswell as i have an intire Z6 topend and p28 <<probably going to be chiped to run the B though. and a few turbo parts secrets of course my buddy was planning a 600hp turbo sohc but i don't think they have a car for it anymore...has all the parts ect FULLY BUILT just sold the car it was going to be for so idk. maybe that route. but B series turbo? mehh why be like everyone else?

 

[mymmeryloss]

looks decent..

 

[matt9112]

looks like a cow now but i could care less functionality first pretty bs last