Impossible spring pin / b**ch pin

MaritimerMitch

New Member
just as the title describes it , its impossibe. iv beat and beat and beat and beat and cursed and beat some more and still hasnt moved at all.. tired drilling it, doesnt work. any ideas before i go insane? im changing the subframe and this is the last thing i need to do ffs and ahhh im goin crazy!
 

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
I used a punch and hammer, worked easily for me.


Sent from my iPhone using Tapatalk
 

jameswanser

Member
Registered VIP
5+ Year Member
yeah. they make a special punch for this (2 step looking punch) but a proper sized punch will work. that and a hammer (or air hammer) will work
 

MaritimerMitch

New Member
i dont understand why u need pics and more info. its pretty straight forward. if u dont no what im talking about already then your not gonna be able to help me. all the info u need is there
 

MaritimerMitch

New Member
the spring pin ( b***h pin ) in the linkage wont come out. what more do u need. sorry to be a d**k but ya get my drift
 

RonJ

Banned
I know exactly the part you want to remove, but I don't know what tools you are using. You may be doing something wrong ---> more info = more help. Otherwise, why even make a thread and waste member's time here? You are asking for help because you have a problem. Yet you can't be bothered to give details? So yeah, you are being a d**k. Ya get my drift?
 

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Yeah, exactly what I would have said Ron.


Sent from my iPhone using Tapatalk
 

Failsafe88

gt CasaNova
Registered VIP
just as the title describes it , its impossibe. iv beat and beat and beat and beat and cursed and beat some more and still hasnt moved at all.. tired drilling it, doesnt work. any ideas before i go insane? im changing the subframe and this is the last thing i need to do ffs and ahhh im goin crazy!
I know exactly the part you want to remove, but I don't know what tools you are using. You may be doing something wrong ---> more info = more help. Otherwise, why even make a thread and waste member's time here? You are asking for help because you have a problem. Yet you can't be bothered to give details? So yeah, you are being a d**k. Ya get my drift?
X2 their are pins all over the car. If we have more of a visual image i could have possibly helped. Being a d**k gets you no where.
 

jameswanser

Member
Registered VIP
5+ Year Member
sorry if I didn't specify, but you want a punch big enough to push on the edge of the pin itself, but small enough to fit in the surrounding hole itself. perhaps an 8mm?
 


Top