hey everyone... i was wondering if anyone knew how to install breathers onto a 96 civic ex with the stock d16y8 engine and a AEM cold air intake... how and where do i install these breathers and is it easy to do ?
Intake Breathers
- Thread starter MyztikRacing
- Start date
anyone?????????????/
A breather?...do you mean a blow off valve?...because if thats what you mean then you need to cut your intake and install it
yea im talkin bout them apc things
they look like little cone filters
what do they do for you
what do they do for you
if you look at the stock setup your oem intake has a whole for the O2 sensor and also tubing that goes into the valve cover as seen below. That is why there are 2. The breathers are supposedly designed to replace your O2 sensor which will in turn screw up your car b/c the comp has no idea how much air is coming in and I also believe the breathers are illegal (at least in NY I know they are)
i have a aem short ram intake and i have three holescivic1582 said:if you look at the stock setup your oem intake has a whole for the O2 sensor and also tubing that goes into the valve cover as seen below. That is why there are 2. The breathers are supposedly designed to replace your O2 sensor which will in turn screw up your car b/c the comp has no idea how much air is coming in and I also believe the breathers are illegal (at least in NY I know they are)
i have one for the 02 and the valve cover tubing. then i have one more that i have pluged up with a rubber seal that came with the intake
i have a 98 civic ex
as you can see, the breather filter is attached to the valve cover. then you need to plug up that hole on your intake, otherwise you will lose air through that hole. I used a bolt cap cover and placed it over that hole on the intake.