Integra parts fit a 2000 civic lx?

[LXDriver]

Do they really? What type: engine or body?

 

[jerk334]

a

 

[knightxrider1]

be more specific.

 

[AllStockHatch]

be more specific.

^^ what he said

 

[LXDriver]

Come on people!!! back to my topic, do they really fit engine-wise or body-wise? which one?

 

[PhntmSk8r]

they are on topic

your question is retarded, be more specific.

do the bodies look at all identical? no.

do you have a B18A/B/C? If not, then engine parts wont either.

 

[EK|B]

The rear brakes fit.

 

[highneo]

wtf are you trying to ask?

yes, engine swaps are interchangeable.
yes, suspension are interchargeable.
yes, seats are interchangeable.
no, the trunk is not interchangable.

 

[wannabe]

the driver's side rear door interior handle - does not fit

 

[knightxrider1]

the shift knobs fit each other tho.

 

[bmx4life54321]

you could throw some side mirrors on there, maybe a sun visor or two just one would be really cool though!!! oh yea if you rotate your floormats regularily in the integra you might as well throw them in your civic. this helps a lot with whp and torque. also your gas milage might be affected due to the increased of 0.03lbs of weight by switching out those matts. hope this is helpful!!!

 

[NFR_AP2]

theres this pretty cool bolt on the integras, it holds the front bumper on, it fits on your civic and adds 3 whp

 

[bmx4life54321]

the muffler bearings are interchangable, the dehicular modifier can me modified and fit, the kenutsen valve retaining spring might also fit, if theres some sweet flame decals on your integra which im sure there are those at about 15whp each flame so your good on all those. also you MIGHT be able to do a horn swap this is very tricky but the outcome is amazing, your cars style will rise through the roof. also dont forget this. its very important, ask chuck norris for help!!!

 

[wannabe]

the piston return springs are interchangeable but only on cylinders 1 and 3. 2 and 4 have a reverse wound coil on the integra which wont work with the standard civic mounting bracket.

 

[NFR_AP2]

lmfao

 

[JohnS.]

http://honda-tech.com/showthread.php?t=1024818

 

[bmx4life54321]

HAHAHAHAHAHA!!! i heard if you put your peenius in the tail pipe to clog the exhaust the back pressure creates 2whp for every second its in there just be careful for the backfire the rod bolts glue might loosen up and there goes your alternator

 

[JohnS.]

^^ That wasn't all that funny. Fail.

 

[R3dline]

1st page was funny, second page =

 

[EK1.6LCIV]

the ITR floor mats will fit the 96-00 civic's fine

I have a set in mine I bought new a few weeks ago

*the exhaust headers from the ITR can fit

* Sways F/R

* 5 stud conversion

* Shift linkages

I could go on for awhile, alot of the stuff can be swapped

including the whole front end to a 96-00 civic (mate finished his facelift swap just a few weeks ago looks mint, with metal gaurds )