Just installed oem fogs

[darthvader]

I just got done installing my oem fog lights, but I have one slight problem. I had to take the bumper off, and when I did I tore the piece where the screw goes into by accident and now mu bumper can't be installed properly. So my question is, do I need a new bumper?

 

[smitty82pu]

post some pics..

 

[gabebauman]

Try some zip ties. Just kidding...pics would be helpful.

 

[Je]

i was hoping for pics, how deceiving

 

[ZimZimma13]

had to do it

 

[2kstreetcivic]

there are lots of things you can be talking about...post pictures

 

[NOFX]

Are you talking about the screw right on the inside of the front of wheel well? Those are the only actual screws that I can think of that in the event the thread was damaged could affect the mounting of the bumper.

 

[2kstreetcivic]

Are you talking about the screw right on the inside of the front of wheel well? Those are the only actual screws that I can think of that in the event the thread was damaged could affect the mounting of the bumper.

there are two screws underneath the bumper too

 

[smitty82pu]

and two bolt screws in the top between the grill and headlights.. geez just post pics like a said an hour and two minutes after the thread was started.. lol

 

[NOFX]

Oh yeah. Oops... and one attaching the airbox of course.

 

[SilverStyle]

mine is a litte torn off on the fender well and its on snug.

 

[anfrey]

the screws that hoook on to the fender at the very rear of the bumper had to replaced on my ride

 

[darthvader]

the screw i was talking about is the ones at the inside of the wheel wells. Sorry about the pics camera is fcuked up.