Mini Me Swap in progress(pix)

[VTEC]

I am doing the mini me swap on my coupe as you read this. Just me and my friend fighting the warm days and the cold nights. We have pulled the head off but sence im doing the mini me swap the head is what i need. so we are dropping the block now. so we can put the d15b7 block in. the block would of been out but the altinator has a stripped bolt on it so we are going to have to drop the motor with that on(which makes it a little harder). well heres the pics as of now more pics later.

 

[42Steps]

Hope it works out all good...

 

[VTECDreaMs]

Good luck and keep us updated.

 

[tienr]

wait, your putting in a d15b7 block in???? you're doing the mini me swap, but your swapping the block???? what engine do you have right now, cuz if you have the 6th gen civic, you should have at least a d16y7, the worst engine they ever put in a 6th gen civic. The mini me swap to me was always either the d1678 head or the z6(?) head onto a d16 block....or i might just be wrong, inform me cuz i'm confuzed right now

 

[VTEC]

D16y8 head on a d15 block

 

[rei]

snazzy.. good luck with that..

 

[EJ's Rule!]

hey I see u dont hasve ur number one piston at the top (at the combustion stage) u better turn that crank pulley so the #1 piston is at the top... u might wanna do that or u could probably have a f**ked up timing bro and ur car will run like s**t...

 

[radarblips]

Good luck with the swap man.

 

[SilverSivic]

Its fun working on your car but its always scary to see it like that....keep us updated and i hope it all works out...

 

[$lick Rick]

lookin good bro.....
good luck

if you use a thinner head gasket you'll see slightly more hp as well..........