my cd player

[hialeahryder]

if n-e-1 has n-e-idea how to take off the dash where the stock radio is @ in a 98 civic please let me know, i thought it was just held down by clips but is not, it has screws somewhere

 

[Sound Streamin']

undo all the screws.

 

[Jake98Civ]

Hey man check out this link.... it helps alot.... gives you step by step instructions...


http://www.installdr.com/InstallDocs/Honda/Civic.html

 

[NineNineCivic]

Originally posted by Sound Streamin'
undo all the screws.

 

[anfrey]

wrong forum. moving

 

[handofgod]

1)Remove your lower dash panels. There are 3 phillips screws drivers side, 2 8mm blts to remove glovebox, 5phillips screws and 1 8mm bolt to remove lower center portion. Once these are off, there should be 2 or 4 8mm bolts holding your radio/htr control housing in place.

2)Remove them.

3)Unplug radio and heater controls, pull housing from dash, install mount kit on workbench.

4)Wire aftermarket harness (Metra 70-1721) to aftermarket radio harness on workbench.

5)Mount cd player in radio housing, plug everything in, put dash back together.

6) Enjoy your CD's!


Note: First time installers should allow approx 1 hour for this install.

 

[96greencivic]

i've got the crutchfield master sheets if you wanna see'um

 

[Silver_Bullet]

Hey man check out this link.... it helps alot.... gives you step by step instructions...


http://www.installdr.com/InstallDocs/Honda/Civic.html

Hey thanks for the tip on this link! It was just what I was looking for! Take it easy.......