My EH2 Turbo

zc vtec

New Member
5+ Year Member
10+ Year Member
Been here for a little bit, figured it's time to show the world my ride.

Mods list(man this could take a while):
JDM ZC SOHC VTEC engine
Garrett T3 Super 60 Turbo
Tial knockoff 35mm Wastegate with atmospheric dump pipe
Generic BOV off Ebay
12X9X2 front mount intercooler(it's tiny!)
Walbro 255 lph fuel pump
DSM 450 cc Injectors
Apexi VAFC
PLX Wideband O2 Sensor
Crower Stage 1 Camshaft
Arias Oversized 9.0:1 compression pistons
Eagle H-Beam Forged Rods
Unorthodox Racing Crank Pulley
Fidanza 6.5 lb Flywheel
Centerforce Stage 2 clutch
Custom cat back exhaust with 5Zigen Border muffler









Car ran a 15.4 before being turbocharged. She'll be seeing lots of track duty come spring time. I Gtech'd it at 14.2 on 5 psi, but I think that's a bit optimistic.
 
Last edited:

Mr. Lin

Admiral Ackbar
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
what is your setup? It looks fantastic...
wait, is that the infamous manifold that cracks alot?
 


42Steps

Welcome my son....
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Not bad... Mod list?..... I like the looks of it though..... =)
 

zc vtec

New Member
5+ Year Member
10+ Year Member
Mod list is above. I was just checking originally to see how well the pics would look.

Yes, that's the infamous SSAutochrome Turbo Manifold. I've had it on for 5 months now, and driven the car in -10 degree weather and it hasn't cracked yet! The way I see it, is they're so damn cheap, if it cracks I'll just buy another one.
 


Mr. Lin

Admiral Ackbar
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
well, the manifold may crack... but it'll damage more than just that...
 

42Steps

Welcome my son....
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
zc vtec said:
Mod list is above......
Was it there the whole time.... If so, damn I'm retarded.... :lol: :lol: :retard:
 

zc vtec

New Member
5+ Year Member
10+ Year Member
TheVTECPush said:
Was it there the whole time.... If so, damn I'm retarded.... :lol: :lol: :retard:
Haha no, I started typing it out after I had checked to see how the pics look.
Every turbo part was purchased off Ebay except for the valve cover breather. I didn't have the money for a full kit when I decided I was sick of losing to 5.0's, so I just started piecing everything together as I could afford it. Having a part time job in university only allows so much income. I forgot to add that the rims are 16 inch Enkeis, they're old and heavy as hell but I still kinda like them. I have GForce adjustables on the inside. They suck, I wanna upgrade this summer.
 

42Steps

Welcome my son....
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Tell me about it.... Try having no job and in college.... It sucks, I haven't put a new part on my car in like a year.... :cry:
 

zc vtec

New Member
5+ Year Member
10+ Year Member
I'm in the same boat man. Although I don't really have anything left to do. I've got the car to pretty much where I want it. The only thing left to do is crank up the boost when I hit the drag strip.

Haha, not too many replies, which is probably a good thing. Usually when there's lots of people talking that means the car is super sweet looking, or riced out and everyone is trashing it. I've gone for neither. I don't want the car to be flashy or riced, so people don't even notice it until I blow past them. =)
 

Mr. Lin

Admiral Ackbar
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Well, turbo on these boards are hard to come by so there are prolly ppl laughing at the mani and there are ppl who have no clue what to say... so... I'm sure you'll get the responses you're looking for.
 

zc vtec

New Member
5+ Year Member
10+ Year Member
Mr. Lin said:
Well, turbo on these boards are hard to come by so there are prolly ppl laughing at the mani and there are ppl who have no clue what to say... so... I'm sure you'll get the responses you're looking for.
True. If the manifold is the only thing that people are gonna trash I'm definitely cool with it. You can't see it when I'm driving around so it's no biggie. It was cheap, and it was the first thing I bought out of the entire project buildup, so I didn't know at the time that they were prone to cracking.
 

Mr. Lin

Admiral Ackbar
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
zc vtec said:
True. If the manifold is the only thing that people are gonna trash I'm definitely cool with it. You can't see it when I'm driving around so it's no biggie. It was cheap, and it was the first thing I bought out of the entire project buildup, so I didn't know at the time that they were prone to cracking.
Live and learn... that's what I say.
 

b16pwrdeg6

New Member
5+ Year Member
10+ Year Member
Looks good man.....you done exactly what I was gonna do with my Z6 until I decided to swap it....post times when you go to the track.
 

DominiYrk09

New Member
5+ Year Member
10+ Year Member
u should have gotten a b20 instead, those cars can go so fast its crazy, ne waytak that yllw honda emblem off the front thats RICER ;)
 

Shiznit

Stickin it to the Man
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
looking good! any track times?
 

Destroy

New Member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
DominiYrk09 said:
u should have gotten a b20 instead, those cars can go so fast its crazy
your a crazy a*****e
 

zc vtec

New Member
5+ Year Member
10+ Year Member
Shiznit028 said:
looking good! any track times?
Just on a GTech, but that's not accurate enough so I don't count it. I'll have an official et slip for it in May.
 

Destroy

New Member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
zc vtec said:
I'll have an official et slip for it in May.
Thats what I like to hear.....FYI....use some slicks :thumbs up
 


Top