my turbo set up i have in mind,cheep on a budget and good

[Ltrain]

for my future rs teg.....iv been researching alot,,,, greddy revhard drag etc so i decided ill go with this set up

http://treadstoneperformance.com/product.phtml?p=25&cat_key=12&prodname=Acura+Integra+Turbo+Kit,+LS,+GS,+GSR+all+years

and..then the following from drag.

Drag High pressure/High volume inline fuel pump
Drag Boost dependent FMU fuel regulator
Blox map bypass
apexi turbo timer
and Autometer Boost and A/F gauges

final cost...2400 give or take a few bucks, so what yall think of this set up.n all comments welcome

 

[Genuine Rolla]

linky no worky....


you could make your own turbo kit for a whole lot cheaper i think...

 

[Ltrain]

<still learning on turbo set ups still a turbo newb, iv been hearing to ditch the fmu and get some dsm 440cc's RESEARCHING AS U READ THIS, i just might leave it to the shop that i plan on having it tuned and installed for me (RPMNYC.COM)

 

[ryanM]

link didnt work for me, but i dont see an IC on your list. if you want. i have a probe FMIC i could sell you for $60. it would work great with that setup

should be a fun build

 

[Ltrain]

linky no worky....


you could make your own turbo kit for a whole lot cheaper i think...

dont feel comfortable enuff doing that with my knowledge, besides i rather have everything new not into used, try the link below

http://treadstoneperformance.com/product.phtml?p=25&cat_key=12&prodname=Acura+Integra+Turbo+Kit,+LS,+GS,+GSR+all+years

 

[Genuine Rolla]

link works now.


nice kit man, go for it!

 

[Shiznit]

dont feel comfortable enuff doing that with my knowledge, besides i rather have everything new not into used, try the link below

http://treadstoneperformance.com/product.phtml?p=25&cat_key=12&prodname=Acura+Integra+Turbo+Kit,+LS,+GS,+GSR+all+years

building a turbo kit with brand new parts will still be cheaper than any premade turbo kit

 

[RKSskier]

$2400 I hope if you spend that much $$$ you have it tuned (meaning a custom mapped tune onto a chipped ecu or a some sort of tunable ems, also injectors.) To be honest you should look around at new parts individually and you can probally save alot of money, and or get better parts. Or used parts for even cheaper, but then you have to be carefull, so if your new with turbo stuff sometimes new could be better I guess if your loaded