Need an intake for a turbo

[jsnm]

Ball Bearing Upgrade& turbo intake

Hi,i just recently bought a rev-hard turbo kit but the kit did not include any type of intake or filter.All i need is the intake pipe that runs off of the turbo for the filter to be placed in a better spot then right next to the turbo.Does any one know where i can purchase,or have one made?Also,Does anyone know where i can purchase the ball bearing upgrae for the turbo?Thank you.Jesse

 

[jsnm]

Anyone have any ideas or suggestions??

 

[SeanMc300]

why buy the upgrade now instead of buying intially?? you can just use a pipe and two couplers and a filter...its not hard.

 

[x0supermonkey0x]

yeah go to like home depot and get 3inch diameter pipe any shape... or custom bend it...

 

[WiggerMan]

Originally posted by x0supermonkey0x
yeah go to like home depot and get 3inch diameter pipe any shape... or custom bend it...

 

[PANGES]

can't u just buy a short ram intake and attatch it to the turbo? they're typically 3" rite? and if it does'nt fit jus cut the piping...?

 

[PANGES]

the couplers attatch it to the turbo rite?

 

[Martin Racing Design]

oh god i cant wait to see the post "I grenaded my car"

CAI at very very minimum.. FMIC is the way to go. Junkyard off of older volvo's and ford probe turbos.

 

[SeanMc300]

ford probe/mazda intercoolers are great, the inlet/outlet is kinda small, but they are good. im personally gonna go with a wrx top mount (front mounted obviously) you dont need cai if you got an intercooler (atleast a good one)

 

[Tommy Pickles]

A lot of smiths or muffler shops can custom bend them for you. Ask around. As for the BB turbo, Rev-Hard, I'm guessin' it's a T3/T4 hybrid. A lot of turbo manufacturers actually make BB upgrades for the turbo so check with them.

 

[turbowhat_n_dat]

Go to a shop and get someone to custom bend you some piping, put a filter on that thing. If you do not you will only be sucking in the hot air that the radiator fan is blowing into it, now regardless if you do have a fmic it will still cool the air, but, why not suck cooler air then cool it more instead of sucking hot air and trying to cool it. If you dont want to go to a custom shop and have some bent purchase a 92-96 prelude intake and cut it down, it will run along your fan and over to the hole in your fender well. It works got it on my pos. You could also go with a 1st/2nd generation mitsu eclipse/starion, dodge daytona intercooler. It is a highly recommended suggestion that you get an fmic whatever you do.