Alright, I bought a Viper 560XV Alarm/Remote Start system for my '00 SI about 4 months ago and im just now getting around to putting it in. Im stuck on the first part of the wiring (wiring the heavy gauge wires). I have a Haynes Book for my car, so it has the wiring schematic for my car and i tried using that, but it is vague in places so I am still unsure if it is 100% correct.
Ok, There are 8 heavy gauge wires that have to hook up to the 5 wires coming from my ignition system.
This is what the diagram in my instructions booklet that came with the system says (these are the wires coming from the alarm/remote system and the text in blue is the wire its supposed to go to):
Purple (+) Starter output to starter (starter side)
Green Starter input from ingnition (key side)
Red (+) High current 12V input
Orange (+) Output to accessory circuit
Pink (+) Output to primary ignition circuit
Red (+) (30A) High current 12V input
Pink/White (+) Output to second ignition circuit
Red/White (+) (30A) High current 12V input
These are the 5 wires coming out of my ignition:
White
Black/White
Black/Yellow
White/Black
Yellow
I am trying to figure out which wire from the alarm/remote system goes to which wire from my ignition.
This is what I know so far:
Red, Red, and Red/White - White wire from my ignition.
Orange - Yellow (+) from my ignition.
Pink - Black/Yellow from my ignition
Pink/White - Yellow from my ignition
Purple and Green are the only ones im having trouble with. I know they go to the starter and the starter wire is black/white from my ignition, but do they both hook up to the same wire?
I know how to do everything else and Ive installed alarm and remote systems on many cars, but this is my first civic and my first viper system and viper wont give me any wiring diagrams for my specific model because i am not a authorized dealer. Please help! Thanks!
Ok, There are 8 heavy gauge wires that have to hook up to the 5 wires coming from my ignition system.
This is what the diagram in my instructions booklet that came with the system says (these are the wires coming from the alarm/remote system and the text in blue is the wire its supposed to go to):
Purple (+) Starter output to starter (starter side)
Green Starter input from ingnition (key side)
Red (+) High current 12V input
Orange (+) Output to accessory circuit
Pink (+) Output to primary ignition circuit
Red (+) (30A) High current 12V input
Pink/White (+) Output to second ignition circuit
Red/White (+) (30A) High current 12V input
These are the 5 wires coming out of my ignition:
White
Black/White
Black/Yellow
White/Black
Yellow
I am trying to figure out which wire from the alarm/remote system goes to which wire from my ignition.
This is what I know so far:
Red, Red, and Red/White - White wire from my ignition.
Orange - Yellow (+) from my ignition.
Pink - Black/Yellow from my ignition
Pink/White - Yellow from my ignition
Purple and Green are the only ones im having trouble with. I know they go to the starter and the starter wire is black/white from my ignition, but do they both hook up to the same wire?
I know how to do everything else and Ive installed alarm and remote systems on many cars, but this is my first civic and my first viper system and viper wont give me any wiring diagrams for my specific model because i am not a authorized dealer. Please help! Thanks!
Last edited: