need info for b16 swap

95hondacivic

New Member
i need to no what all is needed from the integra i am getting the hole car from a buddy that got hit in the side and what else will i have to get to make it work
 

mymmeryloss

RHD is where its at
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
I believe you're talking about a b18 swap...
 

reg_lus

New Member
Registered VIP
5+ Year Member
^ for real lol

mainly harness ecu. and everything that is attached to the motor, of course.
 


Zedicous

New Member
Grab the sway bars and rear conrol arms too..Maybe the front too if it's not an EX.. Breaks also..
 

EG2 LX

New Member
shift linkage, axles, ecu, motor mounts, wire harness. and the engine itself of course:p
 

95hondacivic

New Member
ok so im not sure if its a b18 or b16 i dont have the car yet but hopping i will soon will the integra mounts work to and do i need to buy a jumper for the ecu or harness
 

95hondacivic

New Member
is there anywere i can get a list off everything that has to come from the integra and will i have to get more parts to complete the swap the integra also has a bomb leather intirior that im taking to for my civic
 

MistahJuice

100% real juice
Registered VIP
5+ Year Member
10+ Year Member
Yes there's lists all over the web. If I was on my comp right now I'd give u some links but for looks like you'll have to use google which I know is tough for some noobs. Rule of thumb is if it's attached to the engine, you'll need it. So everything EG2LX said plus the trans, full exhaust, a new radiator unless your gonna try to make the larger hoses fit on your radiator, some wires to wire up vtec if you don't already have it and some more wires for IABs and s*** if it's a GSR, I'd put in a new clutch and resurface the flywheel while you have the engine out, assuming they weren't recently replaced etc

This integra is a 1992+ right?
 

MistahJuice

100% real juice
Registered VIP
5+ Year Member
10+ Year Member
well then its gotta be a b18b1, b18c1 or b18c5 unless he put a different engine in it. Why not just do the swap while you have the teg, that way you have everything you need 2 steps away.
 


Top