@00_Civic_Ex Hey I'm a senior in highschool, so I'm sure you could do fine. It was a royal pain in the ass though. I had to cut into the bumper (which took me forever just to get the guts to start drilling) and set the fogs. They still need to be wired up though, I'm having my buddy help me because he's WAY better at electrical bullshit than I am. But I drilled like seven holes and cut them out with a carpet knife which worked well, and then kept shaving it off to have the face of the fog fit. Then bolted the actual bulb in (and the Ex bumper comes with socket for the screws, which is nice) and then gauged where the attaching face-to-bulb hole would be and drilled that. It's quite a process I'll tell you.