New to the site, heres my ek hatch

ZeroMech63

New Member
Always looked up information on this site and never registered for about 3yrs+.... Names Maldo 23yrs old. Originally from Winter Park(in orlando) FL but in the Army so im always movin around. Bought the hatch in Cali with a b20vtec n/a and now lsv boost....made 374whp@10lbs on 91oct.....cracked a sleeve now im getting another block but sleeved this time and going from 81.5mm to 84mm + S2S1 and from 91 to 93 oct woot woot!!! lol

Couldnt figure out how to upload the on thread so i just created a imageshack account and still rly dont kno how to use it much(sum one pm me how to put them on thread w/o linking)

http://profile.imageshack.us/user/zeromech63/

Thats all ive uploaded for now, my old memory card on my phone died so all the good photos are gone. Recently engines half ass cuz i started taking parts off to see which cylinder cracked but w.e if u guys wanna see ill post a pic. Let me kno what u think n feel free to ask questions or pm me
 

Hendo

Sporting Lunatic Fringe
Registered VIP
5+ Year Member
10+ Year Member
I like it. :thumbs up:

Photobucket ftw
 


ZeroMech63

New Member
Thx for the help and compliments, i have a few questions now. Go Power Motorsports tuned my set up to 374whp@10lbs on stock sleeves...had them rebuild it again with a gsr block(same ls crank) n re used everthing again except the piston where the sleeve cracked n head gasket ofcoarse and even up with another cracked sleeve...Now moved to georgia and now having Central Florida Turbo rebuild my s**t. Did sum research and alot of set ups like mine were not making nearly as much power for that lvl of boost.

Set up:
B16 head(pr3) i think it said
B16 cams(got some brand new Skunk2 Stg1s goin in on this rebuild...got em after doing sum complaining to the owner of GoPwr)
Supertech springs and retainers
Type r intake manifold (think t/b too but not sure)
Ngk 8.5mm spark plug n wires
B18b1 bored n honed(Stock sleeves, waiting on my 3rd block. B18b1 getting darton sleeves put in n goin on this rebuild)
Micropolished Crank
Wiseco 81.5mm 9:1 turbo pistons
Go Pwr rods
ACL brearings
ARP head studs
Brand new GSR oil pump
Cometic head gasket
750cc RC injectors
Walbro 255 lph fuel pump
Comp 58/58 Turbo w/Billet wheel upgrade(non BB)
Ebay turbo manifold
Ebay intercooler
Blackworks half radiator n fan
Ebay 2.5in i/c piping w/black ceramic coating
3in downpipe
3in exh piping(not cat) to Go Pwr blk powder coated muffler
Tuned on a p72 if im not mistaken on Hondata S300 w/boost by gear
LS Hydro tranny
MFactory 1.5way LSD
Competition Stg4 6puck clutch
Competition Lightweight flywheel

Vtec set at 4500rpm n limited at 8500rpm never revd past 8300rpm

Questions:
1.What do u guys think could of caused both the crack sleeves?

2.Full boost was at 6000rpm, but i want it sooner(dunno if it was the tune) how much do yall think Skunk2 Stg1 cams will help with spool up time?

3. How much power yall think i can get out of the same set up(with CFT tuning it) now sleeved,pushing 15lbs and with the new cams?

I want to go 84mm pistons w/10:1 flat top pistons(which is wat CFT is recommending) but is it neccesary for a 550whp goal(on pump gas) if not ill save the money n use the 81.5mm wiseco's i already have.

---------------Sry for the long post and all the questions but ur help and opinions are really needed and appreciated.------------------
 

ZeroMech63

New Member
Dont think that last post shud b one the same thread...... but not sure, if not just let me kno and ill correct it please n thank you.
 

ZeroMech63

New Member
Before i blew it...




From left to right: (Friend1)k24block k20 head+ all bolt onz and JR s/c =348whp.......(me)LsV+Comp 58/58 turbo=374whp.........(Friend2)B16b+intake n exhaust=174whp.........(Friend3)B16A+i/h/e=???
All of us swapped=Some pretty sick cruising :twisted:
 

ZeroMech63

New Member
How the f#$% can i post a pic n have it come out normal?!?!?! Wtf.............Sumone please help..... Tryed those 2 by copying and pasting off of imageshack n pressing: Do not resize before i uploaded them... What did i do wrong?
 
You must log in or register to reply here.


Top