ok i took my triple pillar gauge pod off and put my boost and oilpressure gauges in my new gauge bezel with the 2 pods. only problem is that now the oil pressure gauge is jumping up to 110 and staying there. when i moved them i ran all new grounds and positive wires. these are also going to the gauge lights and the boost gauge. the only wire coming in through my firewall is for the oilpressure gauge. so i hooked it up to the s on the back of the gauge. the pos and neg. are hooked right cuz all lights still work and what not. so why is this thing jumping up like that? it never happened before.
oil pressure gauge help
- Thread starter SickEk
- Start date
Most likely a bad ground. I had to take mine out one time, and forgot to hook the ground back up. I turned the key to accesory, and it jumped up to 110psi, and sat there. I hooked the ground up, and it worked just fine agian. So just double check your ground on it.