Oil Pressure/Temp Gauge Help

[Sirk]

need a bit of help people, is there a way i can install both the Oil pressure gauge and oil temp gauge from a single port on a edelbrock oil filter adaptor??

 

[rey rey]

you 'll need an oil filter sandwitch plate when i find the pdf i'll send it to you.

 

[rey rey]

http://www.thinkauto.com/takeoff.htm

 

[oc_civic]

dont install ANY senders ON the block.. mount them on the firewall and run braided line to the sensor from the point in which you tapped it (filter sandwich, dual port, etc..)..

 

[gearbox]

cant you just get an oil drain plug sensor?

 

[Sirk]

i've already got the edelbrock oil sandwich plate, 1 port is used for turbo feed, i was wondering if i could use the 1 port left for both gauge senders.

 

[oc_civic]

i've already got the edelbrock oil sandwich plate, 1 port is used for turbo feed, i was wondering if i could use the 1 port left for both gauge senders.

you could PROBABLY run braided line to the fire wall and then use some kind of T..

 

[Sirk]

you could PROBABLY run braided line to the fire wall and then use some kind of T..

thats what i was wondering, i wasn't sure tho, i though i would try trusty clubcivic see if anyone else done it