Option Group alarm- Keyless entry ONLY

[ImThaBean]

So, I added power doors to my 94 hatch and wanted to add the convenience of keyless entry. I bought this Option group alarm because it was cheap and has "OE style" key fobs. I am not interested in a full alarm system (this isn't the alarm to buy for that) I just want the push of a button open feature.

I want to see if anyone can help guide me through the wiring to match it to the Honda wiring. Additionally, I want to add a popper to my hatch since there is an option for trunk release (CH1).

94-95 Civic wiring

 

[Deezy]

Download the Service Manual....Here..... And, you will find your wiring diagrams......

 

[ImThaBean]

I have the needed wiring for a typical alarm install (see link below pic). But I just need help trying to weed out unnecessary wires to just install the keyless entry option.

 

[Deezy]

The Manual, provides a complete understanding of the system......

 

[leothelion]

so for your first question:
unlock/lock can be found on the GREEN SECURITY HARNESS. it hooks up to your factory stereo, even if you dont have keyless entry, it will still be back there behind the stereo. so pull that out so you can see it, there will be a blue, and a green wire, i believe that those are lock/unlock respectively. check that manual to be sure. then you just hook those up to that purple and green wire on your opener and bam, power doors.
for your second question:
this can be tricky. many popers you can get, the solenoids inside are just not strong enough. if you really want to do it, your going to have to find a place to mount the popper, i would suggest bolting it behind your driver side quarter pannel, since it would be hidden and also thats where the longest section of wire is. just cut the cable, put it on the popper, and hook the popper up to the alarm.