P06 converted to P28.LOOK and help..

[kikidawn]

well i have converted a P06 to a P28 and socket it to ,but it throw a CEL once i plug it in! Any one here that know about the conversion, would you please look at the picture and tell me what i did wrong! thanks in advance..

<br>

<br>

<br>

<br>

<br>

 

[93turbo16]

well i have converted a P06 to a P28 and socket it to ,but it throw a CEL once i plug it in! Any one here that know about the conversion, would you please look at the picture and tell me what i did wrong! thanks in advance..

That transistor is in the wrong spot...

It should go in the three holes right under the jumper for the vtec conversion.

 

[kikidawn]

really? cause i was shown to do that threw xenocren website....but i will remove it and put it below the jumper...and see what it does.You mean the black one or the orange one?

http://xenocron.com/install/11f0.htm

 

[93turbo16]

really? cause i was shown to do that threw xenocren website....but i will remove it and put it below the jumper...and see what it does.You mean the black one or the orange one?

http://xenocron.com/install/11f0.htm

Trust me, you messed up.


you need to put the black, three legged transistor, in the QXX spot right below the jumper.

The yellow/orange thing is the capacitor.

 

[kikidawn]

Thanks. I did put it in the right spot but yet i still have a CEL light once i plug it in. The chip that i burn is a stock bin for the p28...is that why?

 

[93turbo16]

Thanks. I did put it in the right spot but yet i still have a CEL light once i plug it in. The chip that i burn is a stock bin for the p28...is that why?

Check the code. If it is a solid light, you might of fried the ecu, sorry to say.