pics of my DIY headlights (56k waring)

[soldiaboy]

1st off i just like to thank everyone for the help cause i couldnt do it w/o you guys

pics all the way @ the bottom

 

[CivicSwap93]

no pics yet

 

[soldiaboy]

sorry they didnt work the 1st time check now BTW how do i make it smaller

 

[LatinEM2]

the pics dont' work....host them at.. www.photobucket.com

 

[anfrey]

try uploading the pics to www.imageshack.us ... imagestation is crap.

 

[soldiaboy]

.
.
.
.
.
\/
lower almost there

 

[anfrey]

very nice, next time resize ur pics to 800x600 or so.... or at least recompress the pics. over 400k per photo is way too big.... most 56kers will fall asleep on this thread.

 

[whitebread07]

those pics are huge...looks good though

 

[soldiaboy]

very nice, next time resize ur pics to 800x600 or so.... or at least recompress the pics. over 400k per photo is way too big.... most 56kers will fall asleep on this thread.

how do i compress resize them? can i do it from imageshack?

 

[anfrey]

no, you do it yourself on your computer before you upload. it's quite easy.

 

[dracing]

looks good. How long did it take you?

 

[Squintz]

Open the photos up in mspaint. Go to image/strech skew, then put the percents to about 25. If its still to big, go to 25 again, then save as and repost.

Looking very clean though, those rims are nice.

 

[BlackEJ6]

they look hella nice, loose tje amber though.

 

[Silver-Shooter]

take those monster sized pics off

 

[soldiaboy]

looks good. How long did it take you?

doesnt take long at all,i took off the bumber put the lights in the oven, opend them, painted the housing, let them dry good for about 2 hrs bolt it back up, oven for a 2nd time, put the water seal and pesto. the only bad thing that i didnt do was clean the lights when they where open. then the lights where stock you couldnt really tell it was dirty till i had a diff color backround.

 

[99CWCivicEx]

They came out really nice. I did that to my car too and I love how they came out.

 

[Squintz]

Roughly how long do you think for the whole process? 3-4 hours?

 

[steve98ex]

i did mine, you can do it pretty quick if your just clearing and not painting. you gotta take your time with painting to get good results, 4-6 hrs, but thats drying time and being slow

 

[soldiaboy]

Roughly how long do you think for the whole process? 3-4 hours?

umm i would say 4 hrs, i wasnt paying attention to the time but i would say 4

 

[emerge]

ive never seen anyone leave the amber reflector in the housing after painting them. i actually like it though. great job!