piston and setup question

[cuzzfolk99]

Whats up CC i have a question that has been kinda skippy. Ok the main question is CAN I RUN HIGH COMPRESSION PISTONS ON BOOST. people have told me that i had to run low compression piston on boost but i have a stock internal b16a2 on 8lbs right now. im planning on getting internals done. i want to make about 350-400whp im also in a VAfc tune and 450's with a t3 t4 hybrid. what do i need to hit the 350 mark??

 

[Steven.]

you can, what what do you consider high compression?

you would need a perfect tune, and higher octane fuel

ill see if i can find the equation for the amoutn of pressure with boost and CR

 

[hybrdthry911]

if your getting internals it is definately ideal to run a lower c/r than stock, somethine like 9:1 is pretty standard and works well. and MOST IMPORTANTLY get a real engine management system not that afc. crome is cheap and works well. 450cc injectors wont get you to 350whp pick up some 660s at least maybe some 750s

 

[Steven.]

http://www.turbofast.com.au/TFcompB.html

 

[cuzzfolk99]

well ihave a buddy with a hatch that has 9:1 pistons on a ls vtec and 450's on hondata and hes making 320 whp and it feels super strong so i would like to hit 350- but more likely 375whp

list so far
550's
hondata
internals

what else