please help!!

[silentwhisper]

I have a 95 LX and i changed the head gasket about two years ago after a pretty bad overheat. Since then i have changed my valve cover gasket 3 times because no matter what i do the tube seals always leak. I always use ultra black on all my gaskets and i never have a problem. My car is bone stock, could it be that my valve cover is warped?

 

[JeffBel]

Most likely the head is warped, for some reason the head gasket is good but the tubes are angled. Shot in the dark but try a new VC and make sure is down all the way

 

[silentwhisper]

awsome, thanks

 

[emerican]

if that dosent work pull the head off and you can have somebody check it or check it yourself if you know how.
I hope its not, but my guess would be the heads warped. a shop can fix it i had a dsm with a warped head cost me either 75 or 100 to get it redone, not sure how much it would be around you depends on the shop and all.