Pls help installing back up battery for alarm

[lilspeedy626]

Im trying to install a 520T Backup Battery on my Viper Pager Alarm. Anyways I got eveyrthing connected right, is just that I cant find the instant trigger for my brain. Heres the Installation Guide, scroll al the way down. Which wire is the (-)instant trigger input. I try connecting it to the trunk one, but it dosent work.

http://www.directechs.com/guides/manuals/ig/viper/N564V_6-03.pdf

 

[lilspeedy626]

The insturictions on the backup battery say I am adding a (520T) Battery extender to my Viper 791 autostart and I need some help. The extender is made by DEI and I have figured everything out except one wire:

I dont know what wire on the viper 791 is the "(-) Instant trigger input" any ideas? The install instructions define the wire as follows:

"The (-) trigger output. Connect this wire to the (-) instant trigger input of the security system. This wire will send a (-) signal if the vehicle's battery is disconnected, triggering the security system"

Any ideas? Thanks!