plug issues. :(

[mikeyisfresh]

okay. so I got some new NGK Iridiums and wire set to put in my EM1.. everything was going fine until I got to the 3rd plug (3rd from the right-most plug), and as I loosen the plug (counter-clockwise, obviously) it actually feels like its tightening up... it gets to a point where I can't loosen the plug anymore. I haven't tried to put force into removing the plug because I'm afraid something bad will happen.

anyone ever run into this issue?
I'm not sure if its cross threaded or not... I don't believe it's stripped.

 

[RonJ]

It could be seized with carbon, so slowly apply more force to see whether it comes out. If so, be sure to apply some anti-seize on the spark plug threads before installing the new ones.

 

[mikeyisfresh]

It could be seized with carbon, so slowly apply more force to see whether it comes out. If so, be sure to apply some anti-seize on the spark plug threads before installing the new ones.

once again man, you've helped me out. hahaha. tell me you work on hondas for a living?
do you have paypal? I see you helping everyone all the time. I'd like to donate to the cause.