Question about light bulbs for coupe and hatch

[Mr. EeeKaY]

Hey Wassup,
Does anyone know how to make the tail lights of a coupe, work like a hatch? Where only the outer lights are brake lights and tail lamps. While the ones on the trunk are only tail lamps. In other words, the outter tail lights only turn on.
If anyone knows of a light bulb that would solve this question. PLEASE TELL ME. lol. Or if anyone can let me know what bulbs the hatch uses for it's tail lights. Or a certain wire to cut or remove.

Thanks.

 

[jdmgeorge]

i think what you would do is find the same bulbs you got now in inner taillight but get it as a single filament bulb instead of a dual filament...

 

[Mr. EeeKaY]

bump.... anyone? i couldn't find a single filament....

 

[Mr. EeeKaY]

bump. I found light bulbs sized 1004, single filament, but the pegs dont' line up with the groove. Does anyone have knowledge on this?

 

[KINCHEE]

I have tezza on my 94 coupe and the outer works like what your talkin bout. They act as both turn signal, brake, and taillights while the inner ones stays off until you do a reverse on it. All I had to do was take off the bulb that wasnt require and thats that. So my guess is to take off the inner taillight bulb and that should work. I hope thats some help.

 

[Mr. EeeKaY]

I have tezza on my 94 coupe and the outer works like what your talkin bout. They act as both turn signal, brake, and taillights while the inner ones stays off until you do a reverse on it. All I had to do was take off the bulb that wasnt require and thats that. So my guess is to take off the inner taillight bulb and that should work. I hope thats some help.

Aight. Thanks for your help. But I want to know if anyone knows about the wiring or if there's a bulb that can fit. I don't wanna take out the inner bulbs.. lol