Rear Sway Bar

[SQL2112]

I'm looking for a Suspension Techniques rear sway model 51145 for my 97 EX. I found one place that sells them but they seem sketchy. No SSL on the order form and stuff. All other places sell the kits but I picked up a front on Ebay for $100 so I'm looking to complete the set.

 

[Bagarbilla]

I would atleast get a rear sway/tie bar combonition.

You could go with a 19mm sway/tie bar combo from SRR for 205 or....

Buy yourself a 22mm comptech sway/tie bar combo. A lot of your Understeer will DISAPPEAR. I have mine and I love it.

How big is Suspension Techniques?

 

[2kstreetcivic]

I would atleast get a rear sway/tie bar combonition.

You could go with a 19mm sway/tie bar combo from SRR for 205 or....

Buy yourself a 22mm comptech sway/tie bar combo. A lot of your Understeer will DISAPPEAR. I have mine and I love it.

How big is Suspension Techniques?

have you had any problems with your 22mm sway bar.....tearing from subframe or anything...what kind of suspension set up do you have??

 

[yomuppet]

have you had any problems with your 22mm sway bar.....tearing from subframe or anything...what kind of suspension set up do you have??

Comptech and Progress both make a 22mm that does not cause subframe tear-out. That is normally caused by using a 22mm ITR sway bar on a 6G civic.

 

[anekin007]

hey zulfi, what sites sells the SRR for 205? hit me up with the link!

:edit, i found it. pretty cheap for a sway/tie combo. the comptech is a little too high for me, i think comptech goes for atleast $350

 

[2kstreetcivic]

Comptech and Progress both make a 22mm that does not cause subframe tear-out. That is normally caused by using a 22mm ITR sway bar on a 6G civic.

interesting...... thanks for the info

 

[anfrey]

hey zulfi, what sites sells the SRR for 205? hit me up with the link!

:edit, i found it. pretty cheap for a sway/tie combo. the comptech is a little too high for me, i think comptech goes for atleast $350

care to share where u found it for cheap?

 

[Bagarbilla]

Honda-tech.com (Sposor marketplace) or something has them there for that price. \

I have virtually no problems with my comptech tie/sway combo. SRR would have been my first choice but I found a really good deal on my bar that's why I decided to go with it.

 

[anekin007]

heres the site http://www.exospeed.com/suspension/srr.htm , good prices for 205. most places sell it for about $280

 

[anfrey]

well it's $205 for the rear anti-sway bar..
$55 for the brace (tiebar)

 

[anekin007]

i wasnt really looking at it, i just saw it at a glace. now i notices its seperate. hey zulfi, you have the link to where its for 205? i looked on H-T, but i cant find it. you got hook ups on the comptech? hook me up ..i lost all my contact with the acura dealer people, so no more discount for me

 

[2kstreetcivic]

I used to have a guy that sold them for 205..the SRRs...I will look and see if I can find his email..he might still have some...

 

[anfrey]

this is a pretty good price, i'd love to know

 

[2kstreetcivic]

alright, I found that site I said I would find for the SRR Sway Bar for 205..I am going to get one in a couple of months but for you that have the money now..here ya go..you have to click on the suspension tab on the of the screen and then scroll down...hope this helps some of ya

205 SRR REAR SWAY BAR

 

[anfrey]

same site as posted above. 205 for the swaybar. 55 for the brace.

 

[SiGSR]

The deal isn't bad, but the way how the sway bar is mounted, is questionable. If you notice, the SRR sway bar mounts in the same fashion as the stock rear sway bar. It has a bracket that holds the sway bar that does not mount flat onto the subframe.

The Beak's kit was suppose to reinforce the subframe by distributing the stress applied by the sway bar by spreading it across the whole subframe (and it makes the sway bar have a flat mounting area). I woudn't doubt this could lead to some potential tearouts, but this isn't a 22mm bar (19mm only) and could be different.

Anyone with any real experience with the SRR sway and tie bar?

 

[Bagarbilla]

You know what guys I think that's probably the best price around at this point.

http://honda-tech.com/zerothread?id=560341

This link had it for both the tie/sway combo for 205 shipped but I guess they ended the special already.

 

[2kstreetcivic]

The deal isn't bad, but the way how the sway bar is mounted, is questionable. If you notice, the SRR sway bar mounts in the same fashion as the stock rear sway bar. It has a bracket that holds the sway bar that does not mount flat onto the subframe.

The Beak's kit was suppose to reinforce the subframe by distributing the stress applied by the sway bar by spreading it across the whole subframe (and it makes the sway bar have a flat mounting area). I woudn't doubt this could lead to some potential tearouts, but this isn't a 22mm bar (19mm only) and could be different.

Anyone with any real experience with the SRR sway and tie bar?

is this one going to mount flush?...or is this going to have the same problem as the SRR??

SWAY BAR

 

[SiGSR]

is this one going to mount flush?...or is this going to have the same problem as the SRR??

SWAY BAR

Yes, if you look at it, the part where the sway bar mounts onto is protruding and not flat with the subframe. I still think it's looks like a knockoff of the SRR.

Here's what the SRR looks like.

I rather hear from someone who has acutual experience with the product however, I wouldn't jump to conclusions that it tears out your subframe. I just have some speculations.

 

[2kstreetcivic]

Yes, if you look at it, the part where the sway bar mounts onto is protruding and not flat with the subframe. I still think it's looks like a knockoff of the SRR.

Here's what the SRR looks like.

I rather hear from someone who has acutual experience with the product however, I wouldn't jump to conclusions that it tears out your subframe. I just have some speculations.

cool, thanks...I would like to hear too..because I need a sway bar but I dont want it tearing..because that would suck..thanks man