removing flywheel inspection plate

[all go no show]

ok, well in the process of putting on a new oil pan. I already have the header out of the way, and the pan is unbolted. But right now its hung up on that dust cover/inspection plate at the tranny. My repair manual made no mention of removing the plate, and i dont know what to do!! Can someone help me out??

 

[92EH9]

unbolt the plate and remove it. there should be a couple of bolts and possibly a brace on it.

 

[io_303]

yeh unbolt the plte, then there will be a few more bolts underneath it for th oil pan, hope you didnt pull to much you can mess up the gasket surface of the oilpan like that

 

[all go no show]

yeh unbolt the plte, then there will be a few more bolts underneath it for th oil pan, hope you didnt pull to much you can mess up the gasket surface of the oilpan like that

im not too worried about it, because i got a whole new pan.. but i took off all the bolts i saw for it.. but no brace so maybe ill check that out