removing seats

b18racer

New Member
5+ Year Member
I have a 2000 integra and was wondering how you get the bottom half of the back seats out I have the tops out already and it seams like their is just one bolt under each of the two seats back their, so do you have to take a bolt out from underneith the car or what or what. Thanxs in advance
 

Jezek

No Avatar FTW.
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
There are NO bolts to be removed from outside the car.....it honestly isn't that complicated, just look around for where it's being held down man.
 


BlackHopeDC5

Is Black Again??? :shock:
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
boostinhb77 said:
just pull the seat up?????
that wasnt very helpful now was it
 


soswank

Dentist in the making
Registered VIP
5+ Year Member
10+ Year Member
remove the back tops. there are you will need to remove the moldings. then once you have the rear side moldings, remove the "carpet" from teh rear top. you will see a couple of bolts holding it together, remove them. the top will come out. now remove the hooks that held the top in place. remember the position coz you will have to put them back the same way. now you will see one bolt holding the rear seat. in the back - towards the trunk. unscrew it. lift the back and pop the front out. the y will take some muscle. good luck.
 


Top